Real Fortinet NSE7_SDW-6.4 Exam Dumps with Correct 82 Questions and Answers [Q39-Q53]

By adminOn July 25, 2023

4.5/5 - (2 votes)

Real Fortinet NSE7_SDW-6.4 Exam Dumps with Correct 82 Questions and Answers

Valid NSE7_SDW-6.4 Test Answers & Fortinet NSE7_SDW-6.4 Exam PDF

Fortinet NSE7_SDW-6.4 exam covers various topics such as SD-WAN deployment scenarios, troubleshooting techniques, security policies, and more. NSE7_SDW-6.4 exam is intended for network security professionals who want to gain expertise in SD-WAN technology and provide better connectivity between their organization’s branches. Candidates who pass NSE7_SDW-6.4 exam will get a certification that demonstrates their knowledge and skills in the latest technologies and trends in the industry.

Fortinet NSE7_SDW-6.4 certification is highly valued in the IT industry because it demonstrates a high level of knowledge and expertise in SD-WAN technologies and Fortinet solutions. Fortinet NSE 7 – SD-WAN 6.4 certification is recognized globally and is ideal for IT professionals who want to advance their careers in the networking field. With the increasing demand for SD-WAN solutions, the Fortinet NSE7_SDW-6.4 certification is becoming more important for organizations that want to implement secure and scalable SD-WAN infrastructures.

QUESTION 39
Which statement defines how a per-IP traffic shaper of 10 Mbps is applied to the entire network?

The 10 Mbps bandwidth is shared equally among the IP addresses.

Each IP is guaranteed a minimum 10 Mbps of bandwidth.

FortiGate allocates each IP address a maximum 10 Mbps of bandwidth.

A single user uses the allocated bandwidth divided by total number of users.

Explanation/Reference:
https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/885253/per-ip-traffic-shaper

QUESTION 40
Refer to the exhibit.

Based on the exhibit, which statement about FortiGate re-evaluating traffic is true?

The type of traffic defined and allowed on firewall policy ID 1 is UDP.

FortiGate has terminated the session after a change on policy ID 1.

Changes have been made on firewall policy ID 1 on FortiGate.

Firewall policy ID 1 has source NAT disabled.

QUESTION 41
Refer to the exhibit.

Which statement about the command route-tag in the SD-WAN rule is true?

It enables the SD-WAN rule to load balance and assign traffic with a route tag

It tags each route and references the tag in the routing table.

It uses route tags for a BGP community and assigns the SD-WAN rules with same tag.

It ensures route tags match the SD-WAN rule based on the rule order

QUESTION 42
Refer to the exhibit.

Based on the exhibit, which two actions does FortiGate perform on traffic passing through the SD-WAN member port2? (Choose two.)

FortiGate performs routing lookups for new sessions only after a route change.

FortiGate marks the routing information on existing sessions as persistent.

FortiGate flushes all routing information from the session table after a route change.

FortiGate always blocks all traffic after a route change.

QUESTION 43
When attempting to establish an IPsec tunnel to FortiGate, all remote users match the FIRST_VPN IPsec VPN. This includes remote users that want to connect to the SECOND_VPN IPsec VPN. Which two configuration changes must you make on both IPsec VPNs so that remote users can connect to their intended IPsec VPN? (Choose two.)

Configure different proposals.

Configure a unique peer ID.

Change the IKE mode to aggressive.

Configure different Diffie Hellman groups.

https://kb.fortinet.com/kb/documentLink.do?externalID=10114

QUESTION 44
Refer to the exhibit.

Based on the output, which two statements are true? (Choose two )

The diagnostic output presents only of the policy routes

The all_rules rule is the implicit SD-WAN rule in place

There is more than one SD-WAN rule configured

At least one policy route is implemented and in effect

QUESTION 45
What are two roles that SD-WAN orchestrator plays when it works with FortiManager? (Choose two.)

It configures and monitors SD-WAN networks on FortiGate devices that are managed by FortiManager.

It acts as a standalone device to assist FortiManager to manage SD-WAN interfaces on the managed FortiGate devices.

It acts as a hub FortiGate with an SD-WAN interface enabled and managed along with other FortiGate devices by FortiManager.

It acts as an application that is released and signed by Fortinet to run as a part of management extensions on FortiManager.

Explanation/Reference:

QUESTION 46
Refer to exhibits.
Exhibit A.

Exhibit B.

Exhibit A shows the traffic shaping policy and exhibit B show: the firewall policy FortiGate is not performing traffic shaping as expected basi on the policies shown in the exhibits.
To correct this traffic shaping issue on FortiGate, what configuration change must be made on which policy?

The shaper mode must be applied per-IP shaper on the traffic shaping policy

The application control profile must be enabled on the firewall policy.

The web filter profile must be enabled on the firewall policy

The URL category must be specified on the traffic shaping policy

QUESTION 47
Refer to the exhibit.

Which two statements about the debug output are correct? (Choose two )

The debug output shows per-IP shaper values and real-time readings.

This traffic shaper drops traffic that exceeds the set limits.

Traffic being controlled by the traffic shaper is under 1 Kbps.

FortiGate provides statistics and reading based on historical traffic logs.

QUESTION 48
Refer to the exhibit.

Based on the exhibit, which status description is correct?

Port1 is dead because it does not meet the SLA target.

Port2 is alive because its packet loss is lower than 10%.

The SD-WAN members are monitored by different performance SLAs.

Traffic matching the SD-WAN rule is steered through port2.

QUESTION 49
Refer to exhibits.

Exhibit A shows the SD-WAN rules and exhibit B shows the traffic logs. The SD-WAN traffic logs reflect how FortiGate processed traffic.
Which two statements about how the configured SD-WAN rules are processing traffic are true? (Choose two.)

The implicit rule overrides all other rules because parameters widely cover sources and destinations.

SD-WAN rules are evaluated in the same way as firewall policies: from top to bottom.

The All_Access_Rules rule load balances Vimeo application traffic among SD-WAN member interfaces.

The initial session of an application goes through a learning phase in order to apply the correct rule.

QUESTION 50
Which three performance SLA protocols are available on the FortiGate CLI only? (Choose three.)

tcp-echo

icmp

twamp

udp-echo

smtp

Command output from a fortigate:
FW-01 (test-health-check) # set protocol
ping Use PING to test the link with the server.
tcp-echo Use TCP echo to test the link with the server.
udp-echo Use UDP echo to test the link with the server.
http Use HTTP-GET to test the link with the server.
twamp Use TWAMP to test the link with the server.
dns Use DNS query to test the link with the server.
tcp-connect Use a full TCP connection to test the link with the server.
ftp Use FTP to test the link with the server.

QUESTION 51
Refer to the exhibit.

Based on the exhibit, which two statements about traffic passing through the SD WAN member port2 are true? (Choose two)

FortiGate marks an existing session routing information as persistent

FortiGate, by default, resets all session routing information after a route change

FortiGate flushes all routing information from the session table after a route change

FortiGate performs new routing lookups for new packets after a route change

QUESTION 52
Refer to exhibits.
Exhibit A.

Exhibit B.

Exhibit A shows the SD-WAN rules and exhibit B shows the traffic logs. The SD-WAN traffic logs reflect how FortiGate processed traffic.
Which two statements about how the configured SD-WAN rules are processing traffic are true? (Choose two.)

SD-WAN rules are evaluated in the same way as firewall policies: from top to bottom

The All_Access_Rules rule load balances Vimeo application traffic among SD-WAN member interfaces

The implicit rule overrides all other rules because parameters widely cover sources and destinations.

The initial session of an application goes through a learning phase in order to apply the correct rule

QUESTION 53
Refer to the exhibit.
Multiple IPsec VPNs are formed between two hub-and-spokes groups, and site-to-site between Hub 1 and Hub 2 The administrator configured ADVPN on the dual regions topology

Which two statements are correct if a user in Toronto sends traffic to London? (Choose two )

Toronto needs to establish a site-to-site tunnel with Hub 2 to bypass Hub 1.

The first packets from Toronto to London are routed through Hub 1 then to Hub 2.

London generates an IKE information message that contains the Toronto public IP address.

Traffic from Toronto to London triggers the dynamic negotiation of a direct site-to-site VPN.

SD-WAN_6.4_Study_Guide page 207

Loading …

NSE7_SDW-6.4 Exam Questions and Valid PMP Dumps PDF: https://www.testkingit.com/Fortinet/latest-NSE7_SDW-6.4-exam-dumps.html

NSE7_SDW-6.4, FortinetNSE7_SDW-6.4 latest exam testking, NSE7_SDW-6.4 pass test guide, NSE7_SDW-6.4 reliable exam materials, NSE7_SDW-6.4 test cram pdf, NSE7_SDW-6.4 test simulator online, NSE7_SDW-6.4 valid exam prep, NSE7_SDW-6.4 valid study questions book

Real Fortinet NSE7_SDW-6.4 Exam Dumps with Correct 82 Questions and Answers [Q39-Q53]

Leave a Reply Cancel reply