By adminOn
4.5/5 - (10 votes)

MTCNA Certification – Valid Exam Dumps Questions Study Guide! (Updated 216 Questions)

MTCNA Dumps are Available for Instant Access using TestKingIT

How much MikroTik Certified Network Associate (MTCNA) Exam Cost

The price of the MikroTik Certified Network Associate (MTCNA) Exam is around USD 300. For more information related to exam price, please visit the official website MikroTik Website as the cost of exams may be subjected to vary county-wise. Candidates will encounter preparation costs as well like paying for MTCNA exam dumps pdf and MTCNA practice exams.

Topics of MikroTik Certified Network Associate (MTCNA) Exam

The syllabus may get updated anytime so it is always recommended to visit the official website of MikroTik or check the updated MTCNA exam dumps to access the latest course contents. The following contents are included in the MikroTik Certified Network Associate (MTCNA) exam:

1. Introduction

This module constitutes of the following subtopics:

  • Ways of upgrading
  • Null Modem cable
  • Basic Firewall – NAT masquerade
  • Manage RouterOS logins
  • What is RouterOS
  • Initial configuration (Internet access)
  • Editing an export file
  • Default configuration
  • RouterOS command-line interface (CLI)
  • LAN IP address and default gateway
  • About MikroTik
  • What is RouterBOARD
  • Upgrading RouterOS
  • SSH and Telnet
  • Router identity
  • Command history and its benefits
  • WebFig and Quick Set
  • RouterBOOT firmware upgrade
  • Difference between a backup and an export (.rsc) file
  • Reinstalling a RouterOS device (Netinstall)
  • Saving and restoring the backup
  • RouterOS CLI principles
  • Managing configuration backups
  • Resetting a RouterOS device
  • RouterOS license levels
  • Package types
  • WAN DHCP-client
  • Manage RouterOS services

2. DHCP

This module constitutes of the following subtopics:

  • DHCP server and client
  • Leases management
  • DHCP server network configuration
  • Address Resolution Protocol (ARP)
  • DHCP client
  • RouterOS ARP table
  • ARP modes

3. Bridging

This module constitutes of the following subtopics:

  • Creating bridges
  • Bridge wireless networks
  • Adding ports to bridges
  • Bridge concepts and settings

4. Routing

This module constitutes of the following subtopics:

  • Setting default route
  • Static routing
  • Route flags
  • Routing concepts
  • Routing overview

5. Wireless

This module constitutes of the following subtopics:

  • Frequencies (bands, channels) data-rates / chains (tx power, RX sensitivity, country regulations)
  • Snooper
  • Monitoring Tools
  • Access List
  • Wireless Security and Encryption
  • Connect List
  • Registration table
  • Default Authenticate
  • Access Point configuration

6. Firewall

This module constitutes of the following subtopics:

  • Source NAT
  • Firewall Filter in action
  • Firewall principles
  • Structure, chains, and actions
  • Protecting your router (input)
  • FastTrack

7. QoS

This module constitutes of the following subtopics:

  • Target
  • One Simple queue for the whole network (PCQ)
  • Simple Queue
  • Pcq-rate configuration

8. Tunnels

This module constitutes of the following subtopics:

  • PPP settings
  • Assigning to a service
  • Secure remote networks communication
  • PPP secret
  • PPPoE client
  • PPTP client and a PPTP server (Quick Set)
  • SSTP client
  • PPP status
  • PPPoE service-name
  • Point-to-point addresses
  • Managing ranges

9. Misc

This module constitutes of the following subtopics:

  • Network diagrams
  • Interface traffic monitor
  • Profiler (CPU load)
  • SNMP
  • Traceroute
  • RouterOS tools
  • Readable configuration (item comments and names)
  • Contacting [email protected]
  • Netwatch
  • System logs, enabling debug logs
  • support.rif, autosupout.rif and viewer
  • E-mail
  • Monitoring
  • Ping

For more info read reference:

MikroTik Training

Preparation Material

FAQs and Guide

 

NO.128 Consider the following diagram. We want to communicate from a device on LAN1 to a device on LAN2.
Assuming that all necessary configurations are already included on R2, which of the following configurations in R1 would enable this communication?

 
 
 
 
 

NO.129 Collisions are possible in fullduplex Ethernet networks

 
 

NO.130 Choose all valid hosts address range for subnet 15.242.55.62/27

 
 
 
 

NO.131 What is the default TTL (time to live) on a router that an IP packet can experience before it will be discarded?

 
 
 
 

NO.132 For a Simple Queue to apply a bandwidth restrictions on a bridged interface, following must be done:

 
 
 
 

NO.133 If your router is facilitating a CSU/DSU, which of the following commands do you need to use to provide the router with a 64000bps serial link?

 
 
 
 

NO.134 Which of the following Routes statuses are possible?

 
 
 
 

NO.135 Which is a default baud-rate of currently manufactured RouterBOARDs?

 
 
 
 

NO.136 Evaluate the following information:
Access Point configuration:
— wlan1 is in ‘AP-Bridge’ mode
— Bridge1 has wlan1 and ether1 as ports
CPE configuration:
— wlan1 is in ‘Station-Bridge’ mode
— Bridge1 has wlan1 and ether1 as ports
Select protocols that will pass from ether1 on the CPE to ether1 on the Access Point.

 
 
 
 
 
 
 
 

NO.137 Which command is used to determine if an IP access list is enabled on a particular interface?

 
 
 
 

NO.138 Which of the protocols below is used by Netinstall?

 
 
 
 

NO.139 Which of the following allows a router to respond to an ARP request that is intended for a remote host?

 
 
 
 

NO.140 On the advanced menu of the wireless setup there is a parameter called “Area”, it works directly with:

 
 
 
 

NO.141 What command is used to create a backup configuration?

 
 
 
 

NO.142 What PPP protocol provides dynamic addressing, authentication, and multilink?

 
 
 
 

NO.143 What configuration is added by /ip Hot-Spot setup command? (select all that apply)

 
 
 
 
 

NO.144 Select valid subnet masks:

 
 
 
 

NO.145 Which of the following keystrokes enables safe mode in console:

 
 
 
 

NO.146 If ARP=reply-only is configured on an interface, tcarmehis interface will

 
 
 
 
 

NO.147 The network address is

 
 
 

NO.148 Which computers would be able to communicate directly (without any routers involved):

 
 
 
 

NO.149 The DoD model (also called the TCP/IP stack) has four layers. Which layer of the DoD model is equivalent to the Network layer of the OSI model?

 
 
 
 

NO.150 MikroTik RouterOS is sending logs to an external syslog server. Which protocol and port is used by RouterOS for sending logs (by default)?

 
 
 
 

NO.151 The correct order for PPPOE discovery stage is

 
 
 
 

MikroTik MTCNA Exam Practice Test Questions: https://www.testkingit.com/MikroTik/latest-MTCNA-exam-dumps.html

Related Links: myportal.utt.edu.tt www.stes.tyc.edu.tw www.stes.tyc.edu.tw myportal.utt.edu.tt www.stes.tyc.edu.tw www.stes.tyc.edu.tw