TestKingIT 156-835 Dumps Real Exam Questions Test Engine Dumps Training [Q21-Q44]

By adminOn August 25, 2023

Rate this post

TestKingIT 156-835 Dumps Real Exam Questions Test Engine Dumps Training

CheckPoint 156-835 exam dumps and online Test Engine

CheckPoint 156-835 exam is a computer-based test that consists of 90 multiple-choice questions. Candidates have 90 minutes to complete the exam and must achieve a passing score of 70% or higher. 156-835 exam is available in multiple languages, including English, Japanese, and Chinese. Candidates can take the exam at any authorized Pearson VUE testing center around the world.

CheckPoint 156-835 certification exam is an excellent opportunity for IT professionals to showcase their expertise in Check Point security products. Check Point Certified Maestro Expert certification exam is designed to test the candidate’s knowledge and skills in Check Point’s security solutions, and it is recognized globally. IT professionals who pass the exam will be recognized as Check Point Certified Maestro Experts, which will help advance their careers in the field of cybersecurity.

NEW QUESTION 21
How many power supplies are presented on MHO-140?

1 with option for 2

NEW QUESTION 22
In case of Correction, where is information about Owner stored?

In Connection tables of all Appliances participating in Correction Layer flow

In Correction tables of all Appliances participating in Correction Layer flow

In Correction table of Target Appliance

In Connection table of Target Appliances

NEW QUESTION 23
On MHO-170 – In default configuration, what are GAIA names of Security Group Management ports?

eth1-Mgmt1 and eth1-Mgmt2

eth1-Mgmt1 and eth2-Mgmt1

eth1-Mgmt1 and eth1-Mgmt3

eth1-Mgmt3 and eth1-Mgmt4

NEW QUESTION 24
What does the command’g_all’ do?

It’s followed by other command and execute it on all active Appliances within Security Group

It’s followed by other command and execute it on all Appliances connected to Orchestrator

Switches all Appliances to Global mode

Bring up all Appliances

NEW QUESTION 25
What is the distribution mode?

Distribution mode is the same as QSFP mode

Distribution mode is how the Orchestrator distributes traffic in between Security Groups

Distribution mode means selected algorithm for traffic distribution in between Orchestrators

Distribution mode means selected algorithm for traffic distribution in between Appliances

NEW QUESTION 26
What is the throughput penalty of Security Group?

5% per member

Depends on the type of Appliance

10% per Security Group with no relation to amount of members

1% per member

NEW QUESTION 27
What command should be used for collecting diagnostic information about the orchestrator?

cpinfo

orch_info

cpview

asg pert -v

NEW QUESTION 28
What kind of cluster Dual-Site can be compared to?

Active-Standby or VSLS

VSLS only

Active-Active

Active-Standby only

A Dual-Site cluster is a type of cluster that combines the features of both Active-Standby and VSLS (Virtual Systems Load Sharing) clusters. Dual-Site clusters allow you to have two active clusters, one at each site, and the traffic is distributed between the two sites based on predefined rules and priorities.
A Dual-Site cluster can be compared to an Active-Standby cluster because one of the clusters is running in a passive mode and is only activated in case of a failure or a planned maintenance of the active cluster. And also can be compared to a VSLS cluster because both clusters are active and share the traffic load.
It’s a type of High Availability solution that provides redundancy and failover capabilities across two geographically separated sites. In case of a failure or a outage on one site, the traffic is automatically redirected to the other site, ensuring that the service is not interrupted.

NEW QUESTION 29
What is a downlink interface used for?

To connect Orchestrators to customer’s infrastructure

To connect appliances to customer’s infrastructure

To connect appliances to Orchestrators

To connect in between Orchestrators

NEW QUESTION 30
Which command will be used in order to restart Orchestrator service only?

orchd restart

cpstop; cpstart

reboot

service orchestrator restart

Page 313 from the training manual:
– Restart the service:
orchd restart
– Restart the service without confirmation
service orchd restart

NEW QUESTION 31
What cannot be learned from the output of lldpctl?

Distribution mode

Orchestrator’s IP

Serial number of Appliance

Appliance model

NEW QUESTION 32
What is the maximum amount of Appliances within Security group in Dual-Site configuration?

NEW QUESTION 33
How many power supplies are presented on MHO-170?

1 with option for 2

NEW QUESTION 34
What kinds of transceivers are supported on Orchestrator MHO-140?

SFP, QSFP, QSFP28

SFP, SFP+, QSFP, QSFP28

SFP, SFP+, SFP28

SFP+, SFP28, QSFP

NEW QUESTION 35
Complete the sentence: Orchestrators works as…

Active-Active cluster

Hot-Swap RAID

Active-Standby cluster

Load Sharing cluster

NEW QUESTION 36
Complete the sentence: When using a Break-out cable…

All tails of the break-out cable must represent the same type of ports

All tails of the break-out cable must represent uplinks

Each tail of the break-out cable represent an independent port

All tails of the break-out cable must represent downlinks

NEW QUESTION 37
What is the Iterator process?

Iterator is the process that simulates distribution in case of Appliance failure

Iterator is the process that follow Appliance recovery and simulates what was a distribution if recovered Appliance was alive

Iterator is the process that runs on the Orchestrator and calculates a distribution in case of Appliance failure

Iterator is the process that runs on the Orchestrator and calculates a distribution in case of Appliance recovery

Iterator is the process that follows Appliance recovery and simulates what was a distribution if recovered Appliance was alive. The Iterator process runs on the Security Management Server and simulates the distribution of the Security Gateways if the recovered Appliance was alive. This helps ensure that the network remains secure and the traffic flow is optimized.

NEW QUESTION 38
Which command will be used in order to restart Orchestrator service only?

orchd restart

cpstop; cpstart

reboot

service orchestrator restart

NEW QUESTION 39
What cannot be learned from the output of asg perf -v -p command?

Average CPU usage on Appliances

Real-time throughput

Average CPU usage on Orchestrators

Per-path distribution

NEW QUESTION 40
One single Appliance supports 1M concurrent connections. How many concurrent connections will support Security Group of 2 Appliances?

500K

NEW QUESTION 41
Which is a valid requirement for a supported Maestro appliance?

10GBps and 40Gbps or 100Gbps card with double-VLAN and LLDP support

At least one 10GBps line card

Nothing special as Maestro supports any Check Point appliance

Line card with double-VLAN and LLDP support

NEW QUESTION 42
How many orchestrators may Dual-Site include”

2 or 4

Only 4

NEW QUESTION 43
What is the minimal amount of cables needed in order to connect an Appliance to an Orchestrator?

Three cables: uplink, downlink, SYNC

One Downlink cable only

Two cables: one uplink and one downlink

Four cables: uplink, downlink, SYNC and Management

NEW QUESTION 44
What cannot be a reason for DETACHED status of Appliance when running asg monitor command?

Appliance reboots

Appliance is a member of Security Group, but currently disconnected

Appliance installed with R80.20

There’s an issue with Downlink cable

Loading …

CheckPoint 156-835: Selling CCME Products and Solutions: https://www.testkingit.com/CheckPoint/latest-156-835-exam-dumps.html

156-835, CheckPoint156-835 latest study notes, 156-835 new dumps free, 156-835 regular updates, 156-835 simulations pdf

TestKingIT 156-835 Dumps Real Exam Questions Test Engine Dumps Training [Q21-Q44]

Leave a Reply Cancel reply