By adminOn
5/5 - (3 votes)

2023 Realistic TestKingIT JN0-363 Dumps PDF – 100% Passing Guarantee

Free Juniper JN0-363 Exam Questions and Answer

Juniper JN0-363 Exam Certification Details:

Exam Registration PEARSON VUE
Sample Questions Juniper JN0-363 Sample Questions
Passing Score Pass / Fail (60-70% Approx.)
Exam Name Service Provider Routing and Switching Specialist
Recommended Training Junos Intermediate Routing (JIR)
Junos Service Provider Switching (JSPX)
Junos MPLS Fundamentals (JMF)

Juniper JN0-363 Exam Topics:

Section Objectives
Border Gateway Protocol (BGP) – Identify the concepts, operation, or functionality of BGP:

  • BGP basic operation
  • BGP message types
  • Attributes
  • Route/path selection process
  • Internal and external BGP (IBGP and EBGP) functionality and interaction

– Demonstrate knowledge of how to configure, monitor, or troubleshoot BGP:

  • Groups and peers
  • Additional basic options
  • Routing policy application
High Availability – Identify the concepts, benefits, applications, or requirements of high availability:

  • Link aggregation groups (LAGs) and multichassis LAGs (MC- LAGs)
  • Graceful restart (GR)
  • Graceful Routing Engine switchover (GRES)
  • Nonstop bridging (NSB)
  • Nonstop active routing (NSR)
  • Bidirectional Forwarding Detection (BFD)
  • Virtual Router Redundancy Protocol (VRRP)
  • Unified In-Service Software Upgrade (ISSU)

– Demonstrate knowledge of how to configure, monitor, or troubleshoot high availability components:

  • LAG
  • Graceful restart, GRES, NSB, and NSR
  • Virtual Router Redundancy Protocol (VRRP)
Spanning-Tree Protocols – Identify the concepts, benefits, operation, or functionality of Spanning Tree Protocol and its variants:

  • Spanning Tree Protocol (STP), Rapid Spanning Tree Protocol (RSTP), Multiple Spanning Tree Protocol (MSTP), and VLAN Spanning Tree Protocol (VSTP) concepts
  • Port roles and states
  • Bridge Protocol Data Units (BPDUs)
  • Convergence and reconvergence
  • Spanning-tree security

– Demonstrate knowledge of how to configure, monitor, or troubleshoot STP and its variants:

  • Spanning-tree protocols (STP, RSTP, MSTP, VSTP)
  • BPDU, loop and root protection
Protocol-Independent Routing – Identify the concepts, operation, or functionality of various protocol-independent routing components:

  • Static, aggregate, and generated routes
  • Martian addresses
  • Routing instances, including routing information base (RIB) (also known as routing table) group
  • Load balancing
  • Filter-based forwarding

– Demonstrate knowledge of how to configure, monitor, or troubleshoot various protocol-independent routing components:

  • Static, aggregate, and generated routes
  • Load balancing
  • Filter-based forwarding
Multiprotocol Label Switching (MPLS) – Identify the concepts, operation, or functionality of MPLS:

  • MPLS terminology
  • MPLS packet header
  • End-to-end packet flow and forwarding
  • Labels and the label information base
  • MPLS and routing tables
  • RSVP
  • LDP
  • Segment routing

– Demonstrate knowledge of how to configure, monitor, or troubleshoot MPLS:

  • MPLS forwarding
  • RSVP-signaled and LDP-signaled Label-Switched Paths (LSPs)
Open Shortest Path First (OSPF) – Identify the concepts, operation, or functionality of OSPF:

  • Link-state database
  • OSPF packet types
  • Router ID
  • Adjacencies and neighbors
  • Designated router and backup designated router
  • OSPF area and router types
  • Link-state advertisement (LSA) packet type

– Demonstrate knowledge of how to configure, monitor, or troubleshoot OSPF:

  • Areas, interfaces and neighbors
  • Additional basic options
  • Routing policy application
  • Troubleshooting tools
IPv6 – Identify the concepts, operation, or functionality of IPv6:

  • IPv4 versus IPv6
  • Address types, notation, and format
  • Address scopes
  • Autoconfiguration
  • Tunneling

– Demonstrate knowledge of how to configure, monitor, or troubleshooting IPv6:

  • Interfaces
  • Static routes
  • Dynamic routing (OSPFv3, IS-IS, BGP)
  • IPv6 over IPv4 tunneling
Layer 2 Bridging or VLANs – Identify the concepts, operation, or functionality of Layer 2 bridging for the Junos OS:

  • Service provider switching platforms
  • Bridging elements and terminology
  • Frame processing
  • Virtual Switches
  • Provider bridging (Q-in-Q tunneling)

– Identify the concepts, benefits, or functionality of VLANs:

  • Port modes
  • Tagging
  • Integrated Routing and Bridging (IRB)/li>

– Demonstrate knowledge of how to configure, monitor, or troubleshoot Layer 2 bridging or VLANs:

  • Interfaces and ports
  • VLANs
  • IRB
  • Provider bridging
Intermediate System to Intermediate System (IS-IS) – Identify the concepts, operation, or functionality of IS-IS:

  • Link-state database
  • IS-IS protocol data units (PDUs)
  • Type, length, values (TLVs)
  • Adjacencies and neighbors
  • Levels and areas
  • Designated intermediate system (DIS)
  • Metrics

– Demonstrate knowledge of how to configure, monitor, or troubleshoot IS-IS:
Levels, interfaces and adjacencies

  • Additional basic options
  • Routing policy application
  • Troubleshooting tools

 

Q91. Which two functions are performed by the OSPF designated router? (Choose two.)

 
 
 
 

Q92. Your customer complains that their Layer 3 VPN is not passing traffic from one site to another. You assigned that customer to VPN-A. Which command on the PE router will confirm the presence of customer routes?

 
 
 
 

Q93. Which statement is true when using MVRP on MX Series devices?

 
 
 
 

Q94. Click the Exhibit.


Referring to the exhibit, the GRE tunnel between R-1 and R2 allows connectivity between User-1 and Server-1. User-1 can communicate with Server-1 with packets that are up to 1448 bytes in size.
However, if the packet size is larger than 1448, User-1 cannot communicate with Server-1.
In this scenario, how do you solve the communication problem?

 
 
 
 

Q95. You want to disable MAC learning only for interface ge-0/0/0.0 on an MX Series device.
Which syntax will accomplish this task?

 
 
 
 

Q96. You are asked to configure and apply a new routing policy to influence routing advertisements received from a specific EBGP peer.
In this scenario, which statement is true?

 
 
 
 

Q97. Click the Exhibit button.

Referring to the exhibit, why is the route hidden?

 
 
 
 

Q98. Referring to the exhibit, which firewall filter action(s) will be applied to incoming frames to ge-1/0/3?

 
 
 
 

Q99. Click the Exhibit.

Referring to the configuration in the exhibit, which two statements are true? (Choose two.)

 
 
 
 

Q100. Click the Exhibit button.

You have configured IPv6 over IPv4 tunneling, as shown in the exhibit. However, hosts connected to network 2001:0:0:1::0/64 cannot communicate with hosts on network 2001:0:0:2::0/64. The router R2 has a similar configuration as the R1 router.
How would you solve this problem?

 
 
 
 

Q101. Click the Exhibit.

Your router has an external peering session to 10.10.25.5 and several internal peers. However, routes learned from EBGP peers are showing up in a hidden state on IBGP peers.
Where would you apply the policy shown in the exhibit to solve this issue?

 
 
 
 

Q102. You have configured multiple IP-IP tunnels across your network to provide connectivity to remote sites.Which technique is used to help the IP endpoints in your network determine the optimal packet size to send across your tunnels?

 
 
 
 

Q103. Which two events could cause the BGP Active state to appear? (Choose two.)

 
 
 
 

Q104. You are logged into a PE router participating in a Layer 3 VPN as defined in RFC 4364. You would like to ping the locally connected CE router’s interface. The address of the interface is 192.168.1.1; the VPN routing-instance is named VPN-A.Which command will accomplish this task?

 
 
 
 
 

Q105. What is the size of the unique address used to identify each node on an Ethernet LAN?

 
 
 
 

Q106. What is required on the egress and ingress devices to transport IPv6 traffic across an IPv4 network?

 
 
 
 

Q107. You are deploying an RSVP-based MPLS network in your core. You must ensure that your LSPs are continually analyzing the usage levels and recalculating the best LSP. You also want to ensure that a minimal amount of traffic is lost when an LSP is re-signaled without user intervention.
Which two features must be enabled in this scenario? (Choose two.)

 
 
 
 

Q108. You are establishing RSVP LSPs through your MPLS-enabled network. You are asked to ensure that the LSPs will support end-to-end class-of-service handling.
Which statement is correct in this scenario?

 
 
 
 

Q109. What is the correct simplification of the 2001:0000:0000:0234F:0000:CBFF:5CA1:A001 IPv6 address?

 
 
 
 

Q110. Which two statements correctly describe the BGP community attribute? (Choose two.)

 
 
 
 

Q111. Which two statements are true for GRE tunneling? (Choose two.)

 
 
 
 

Q112. Which statement is true regarding default MPLS label handling?

 
 
 
 

Q113. Click the Exhibit.


You have just configured a GRE tunnel, but you notice that the GRE tunnel is flapping.
Referring to the exhibit, which two would you take to solve this problem? (Choose two.)

 
 
 
 

Q114. Click the Exhibit.

Referring to the exhibit, which IS-IS router will be selected as the DIS?

 
 
 
 

Q115. Click the exhibit.

A customer has two VLANs to extend between Site-1 and Site-2. The customer does not want to route the VLANs or renumber the VLANs.
Referring to the exhibit, which two VLAN IDs are egressing the MX Series device towards the optical transport network after translation? (Choose two.)

 
 
 
 

Verified JN0-363 dumps Q&As Latest JN0-363 Download: https://www.testkingit.com/Juniper/latest-JN0-363-exam-dumps.html

Related Links: www.stes.tyc.edu.tw www.stes.tyc.edu.tw www.stes.tyc.edu.tw www.stes.tyc.edu.tw www.stes.tyc.edu.tw www.stes.tyc.edu.tw