View All CTAL-TM-001 Actual Free Exam Questions Jun 13, 2024 Updated [Q15-Q38]

By adminOn June 13, 2024

Rate this post

View All CTAL-TM-001 Actual Free Exam Questions Jun 13, 2024 Updated

Pass Authentic ISQI CTAL-TM-001 with Free Practice Tests and Exam Dumps

For more info visit:

CTAL-TM Certified Professional Salary

United States: $73,763
India:₹524039
Europe:€66508
England: £56673

NEW QUESTION 15
You are a new Test Manager on a maintenance release for an existing mature product that is expected to be retired in the not too distant future. The previous release had utilized a performance regression test suite written in an in-house custom tool using the same programming language as the product itself. This suite will most likely require tweaking to ensure it works with the new version of the product. While there are several members in the performance testing team, the original author of the performance testing tool has moved on to another company, and none of the remaining staff have a great deal of familiarity with the performance test scripts used to test this product.
How would you recommend this scenario be addressed? [3]

Retire the in-house tool and switch to a vendor supported tool for performance testing.

Reduce the scope of the product testing to exclude performance testing.

Make the in-house tool available to the open source community.

Leverage the development team to fill any knowledge gaps in the in-house tool.

NEW QUESTION 16
IEEE 1028 also defines “management review” as a type of review. What is the main purpose of a management review? 1 credit

Align technical concepts during the design phase

Establish a common understanding of requirements

Provide independent evaluation of compliance to processes, regulations, standards etc.

To monitor progress, assess the status of a project, and make decisions about future actions

NEW QUESTION 17
Which technique will assist you in determining targeted improvement areas to reduce the number of defects?
[1]

Cost of quality analysis

Defect triage

Pareto analysis

Test coverage assessment

NEW QUESTION 18
Which of the following team roles would be most appropriate to enhance the team and why? 2 credits

A person with the ability to complete tasks

A quality assurance officer

A person with in-depth technical skills

A person who brings new ideas to the team

NEW QUESTION 19
What would be a test approach regarding the test design techniques to be applied that would fit an item with the highest risk? 2 credits

Component testing: decision testing; System testing: exploratory testing

Component testing: decision testing; System testing: decision table testing

Component testing: statement testing; System testing: equivalence partitioning

Component testing: statement testing; System testing: decision table partitioning

NEW QUESTION 20
Which of the following software characteristics are possibly revealed through the application of a open source static analysis tool? [1]

Coding standard violations

Memory leaks

Concurrency thresholds

Timing dependencies

NEW QUESTION 21
What test process is included as part of TPI Next? [1]

Identify test specification

Identify test environment

Identify test execution

Identify test conditions

NEW QUESTION 22
You just handed over the Defect Accepted and Deferred report to your Maintenance team.
Which testing activity are you performing? [1]

Defect Design

Test Decommission

Test Exit Criteria

Test Closure

NEW QUESTION 23
What is a “depth-first” risk-based testing technique? [1]

Highest risk test cases are executed first

All risk items are tested at least once

Lowest risk test cases are executed first

Non-functional test cases are executed first

NEW QUESTION 24
Which of the following product risks would be most effectively addressed just by static testing? 3 credits

In the delivered application, one of the countries, as specified in the requirements, has not been correctly implemented.

The application takes too long to process a request for additional cover.

The test cases do not cover the key requirements.

The successful bidder may not deliver all the required functionality on time.

NEW QUESTION 25
Which of the following statements is true regarding documentation standards? [2]

Documentation standards are a lower priority than testing standards.

Documentation standards can vary depending on the test level.

Agile projects consistently use level test plans and documentation standards.

Documentation standards are determined by the Project Manager.

NEW QUESTION 26
Mary is an external IT auditor. She is conducting a review of the system-level testing done by Greg’s functional testing team.
Which of the following items from Mary’s assessment summary should concern Greg the most? [2]

All the Business requirements could be traced to Test Objectives. However there was no tracing from the Business Requirements to the project’s test schedule.

Some of the Test Objectives could only be mapped back to a single Business Requirement.

A few of the Test Objectives did not have any Test Conditions assigned to them.

There were Test Conditions which didn’t tie back to any Business Requirement.

NEW QUESTION 27
You are about to release a test progress report to a senior manager, who is not a test specialist.
Which of the following topics should NOT be included in the test progress report? 1 credit

Product risks which have been mitigated and those which are outstanding.

Recommendations for taking controlling actions

Status compared against the started exit criteria

Detailed overview of the risk-based test approach being used to ensure the exit criteria to be achieved

NEW QUESTION 28
The test improvement project will take place in an organization developing a safety-critical avionics application. Which one of the following standards do you believe would be most appropriate to take into account for compliance during your assignment? 1 credit

ISO 9126

IEEE 829

BS 7925/2

DO-178B

NEW QUESTION 29
As a result of the RAD based development approach, the test manager has decided to change the risk mitigation approach. Which test technique might be most appropriate to use? 2 credits

Decision Table Testing

Boundary Value Analysis

Error Guessing

Exploratory Testing

NEW QUESTION 30
What is the Risk Priority Number for risk item number 2? 2 credits

NEW QUESTION 31
As part of the improvement program, the organization is also looking at tool support. Which type of tool could be used to ensure higher quality of the code to be reviewed? 1 credit

Review tool

Test execution tool

Static analysis tool

Test design tool

NEW QUESTION 32
In general, why is it NOT a good idea to estimate the testing effort based only on a percentage of development effort? Identify THREE valid reasons. 1 credit

The quality of the development estimate may be poor.

In general bottom-up estimation is always better than top-down estimation.

The percentage based technique only applies to the V life cycle model.

Using the same percentage every time does not address the level of risk of the application to be tested.

The maturity of the organization, e.g. the quality of the test basis, quality of development testing, configuration management, availability of test tools, also influence the effort needed for testing.

It builds on large set of historical data

The result is almost always a too low estimate for the required test effort

NEW QUESTION 33
The introduction of reviews and inspections has often failed as a process improvement action.
Identify the THREE most important measures that should be taken to reduce the risk that this test process improvement will fail. 2 Credits (for 2 out of 3 correct 1 credit)

Process ownership and experienced moderators who drive the inspection process.

Management support

Training of those involved

The availability of stands and processes

Usage of a more traditional software development lifecycle

Alignment with software process improvement

Using a reference model, e.g. TMMi

NEW QUESTION 34
Which of the following are valid reasons for adopting a different life cycle (from the V model), for increments after the first year? 2 credits i. We do not have a clear understanding of the requirements from a customer perspective.
ii. We see the risk of delivering requested functionality late as being higher than the risk of delivering a lower quality product.
iii. We do not have a budget for additional regression testing which is needed to ensure that existing functionality is not compromised by future iterations.
iv. The company test strategy does not fit well within the V life cycle model.

(i) and (ii)

(i) and (iv)

(ii) and (iii)

(ii) and (iv)

NEW QUESTION 35
Your test process is fully integrated into the software development lifecycle. You are at which TMMi level?
[1]

Initial

Managed

Defined

Optimized

NEW QUESTION 36
Risks should be constantly reviewed. Given the current situation, which one of the following factors is most likely to lead to a revised view of product risk? 3 credits

The concerns over the user interface may lead to changes to the interface which cannot be implemented by development in time for the second test iteration.

The concerns over the user interface raises the likelihood of a risk in that area and increases the amount of test effort needed for the user interface, thereby limiting the test effort available for other parts of the test management tool.

The delivery of the application without the interface changes may upset the user community.

The method used for test estimation is not accurate enough and hence the money spent on testing exceeded its budget.

NEW QUESTION 37
Identify THREE items that would be part of the work-breakdown structure showing the key testing activities for the acceptance test project. 2 credits (for 2 out of 3 correct 1 credit)

Test planning, test case preparation and test execution for each of the four iterations

Work should be explicitly allocated to test completion, test management, installation and to training on using the system

Activities to deploy the system in the user environment

Regression testing in the second, third and fourth iterations

Development activities for unit and integration testing

Reviews on requirements documentation

Defining test environment requirements for system testing

NEW QUESTION 38
Which of the following is a key characteristic of a management review? [1]

Used to assess project risks

Used to check consistency of and deviation from the system requirements

Run by a moderator

Conducted by an external group to assess process compliance

New CTAL-TM-001 Exam Questions Real ISQI Dumps: https://www.testkingit.com/ISQI/latest-CTAL-TM-001-exam-dumps.html