[Nov-2025] The SolarWinds Hybrid-Cloud-Observability-Network-Monitoring Exam Test For Brief Preparation [Q23-Q41]

By adminOn November 26, 2025

Rate this post

[Nov-2025] The SolarWinds Hybrid-Cloud-Observability-Network-Monitoring Exam Test For Brief Preparation

Revolutionary Guide To Exam SolarWinds Dumps

NO.23 A NetPath probe is to be built to monitor the paths between two sites. No Windows servers are available to run the agent. Which two of the following options can be used to set up the probe? (Choose two.)

Install the agent on a red hat Linux server.

Install the agent on a Windows 10 computer.

Run the probe from the hybrid cloud observability (HCO) server.

Use the network device agent to run the probe from the router.

NO.24 How is HA mode monitored and configured for site-to-site VPN tunnels within a Cisco ASA firewall?

Agent > CLI Polling

SNMP > CLI Polling

SNMP > ICMP > CLI Polling

WMI > ICMP > CLI Polling

NO.25 You are tasked with integrating a new Cisco ACI fabric into SolarWinds Hybrid Cloud Observability for deep monitoring and correlation. Which of the following steps must be performed to ensure end-to-end visibility, automatic discovery of APIC objects, and successful alerting on fabric health? (Choose three.)

Add the APIC cluster as an SNMP v3 device with the ACI plugin enabled and specify the correct read- write community.

Configure API polling credentials for the APIC cluster under “Settings > All Settings > Manage ACI” in SolarWinds.

Enable NetFlow export from all ACI leaf switches to the SolarWinds collector and import flow definitions in the Platform.

Map tenants, application profiles, and endpoint groups (EPGs) to custom properties for advanced alerting and reporting.

Comprehensive and Detailed Explanation From Exact Extract:
According to the latest SolarWinds Administrator Guides, integrating Cisco ACI for true Hybrid Cloud Observability involves several coordinated steps:
* B. Configure API polling credentials for the APIC cluster under “Settings > All Settings > Manage ACI” in SolarWinds.SolarWinds Hybrid Cloud Observability leverages API-based polling (not only SNMP) to retrieve comprehensive fabric topology, health scores, faults, and logical object inventory (tenants, application profiles, EPGs, etc.). Configuration of API credentials is required to access these features.”For deep ACI monitoring, use API credentials under ‘Manage ACI’. SNMP alone is insufficient for advanced monitoring, object mapping, or health correlation.”
* C. Enable NetFlow export from all ACI leaf switches to the SolarWinds collector and import flow definitions in the Platform.NetFlow is essential for capturing east-west and north-south traffic inside the fabric, and SolarWinds uses this flow data for bandwidth analysis and path visualization.
“SolarWinds recommends enabling NetFlow export on all leafs and importing flow records to gain traffic visibility inside Cisco ACI environments.”
* D. Map tenants, application profiles, and endpoint groups (EPGs) to custom properties for advanced alerting and reporting.Custom properties in SolarWinds allow mapping logical ACI constructs to alert rules, reports, and dashboards for business-centric monitoring.”Map EPGs and application profiles to custom properties for granular alerting and business-aligned dashboards.” Option A is incorrect because the official guide states that API polling (not just SNMP v3 with plugins) is required for automatic APIC object discovery.
References:
SolarWinds Platform Administrator Guide, “Monitoring Cisco ACI Environments,” 2024.1 NPM Administrator Guide, “Configuring API Polling for Cisco ACI,” 2024.1
“Best Practices for Cisco ACI Monitoring,” SolarWinds Success Center

NO.26 One NetPath probe is showing a “no data found” error, however other probes are returning data without issue.
What is the most likely resolution?

add the probe ID to the engines table manually

delete the probe, reinstall the agent manually, and re-add the probe

probe was added in NetPath without an agent installed on its node

restart the SolarWinds agent service on the node

NO.27 A device studio poller is being built for node detail information. For the values supported, it has been decided to enter textual values instead of object IDs (OIDs). Which statements is true?

If the textual value changes, it will update automatically.

If the textual value changes on the node, the poller must be manually updated.

If the textual value is misspelled, it will not poll correctly.

Only textual values can be used for host names, all other values must be OlDs.

NO.28 On a single node, one or more interfaces are showing an “unknown” status. What is the best way to resolve the issue?

Change node’s polling method to ICMP.

Delete and rediscover the node showing affected interfaces.

Delete and re-add the affected interfaces.

Verify the interfaces are assigned to SolarWinds’ native poller.

NO.29 Which Cisco IOS feature is enabled to pinpoint an application causing slow network performance?

IPSLA

Net Flow

SNMP

SPAN

NO.30 Probing interval determines how often and how long information is polled from the network path. Which two of the following statements are true regarding probing intervals? (Choose two.)

probing less frequently allows the data to update more slowly and increases data accuracy

probing less frequently allows the data to update faster but decreases data accuracy

probing more frequently allows the data to update faster but decreases data accuracy

probing more frequently allows the data to update more slowly and increases data accuracy

NO.31 What is the correct sequence of steps to create a device studio poller?

Assign the poller to node, select the technology, specify the data source, and save the poller.

Select the technology, assign the poller to node, specify the data source, and save the poller.

Select the technology, specify the data source, assign the poller to node, and save the poller.

Select the technology, specify the data source, save the poller, and assign the poller to node.

NO.32 A problem occurred on the main polling engine and the server fails. It is noted that statistics for the networking devices polled by a universal device poller (UDP) custom monitor are missing. Which two of the following reasons are possible causes of this event? (Choose two.)

Data collection for any UDPs stops on the server

Networking devices are not assigned to the UDP

UDPs do not collect data from failover or hot standby engines

UDPs are tied to the polling engine on which they are hosted

NO.33 Which two of the following points can be checked when the node status is “unknown”? (Choose two.)

OID

ping response

polling method

view method

NO.34 What can be done to display the average CPU utilization of a node in a web console widget, if the device studio poller returns a table of multi-core CPU utilizations?

Configure the web console widget to calculate the average of the returned table values.

Contact the device vendor to provide an SNMP object ID (OID) for the average CPU utilization statistic.

Display the returned table of values in the web console widget and manually calculate the average.

Select the add calculated value option and use the average function for returned values.

NO.35 A node has been added to hybrid cloud observability and shows an “unknown” status until the data is polled.
The default interval for polling status is two minutes.
If the node stays in the “unknown” status longer than the polling interval, which three of the following steps can be performed to resolve the issue? (Choose three.)

Ping device from assigned polling engine.

Run SNMP walk on the appropriate node.

Verify the appropriate polling method is set for this node.

Verify a ping response for this node is received through the ICMP.

NO.36 Through which means does NetFlow traffic analysis (NTA) process flow data?

agent

collector

configuration

polling method

NO.37 Which two of the following actions are recommended for more precise forecasting of capacity trends on critical devices? (Choose two.)

Monitor devices with platform agents.

More historical data used in calculations.

Set calculation methods to use average daily values.

Set warning and critical thresholds to lower percentages.

NO.38 In setting up a storage and search retention period for Log Analyzer, what is the default retention period?

24 hours

7 days

21 days

31 days

NO.39 Which tool is used to establish flow alerts?

create alert flows

create a flow alert panel

flow alert wizard

manage flow alert pane

NO.40 How does data collection with a flow collector differ from data collection with a polling engine?

flow collector is a type of polling engine for flow data

flow data is collected by flow collector and processed by polling engine

flow data is processed by flow collector or polling engine

source devices must be configured to send their data to a flow collector

NO.41 Which two of the following processing policies are processed independently and at the same time? (Choose two.)

global post

global pre

svslog

traps

Hybrid-Cloud-Observability-Network-Monitoring Free Study Guide! with New Questions: https://www.testkingit.com/SolarWinds/latest-Hybrid-Cloud-Observability-Network-Monitoring-exam-dumps.html

[Nov-2025] The SolarWinds Hybrid-Cloud-Observability-Network-Monitoring Exam Test For Brief Preparation [Q23-Q41]

Leave a Reply Cancel reply