[UPDATED 2025] CheckPoint 156-836 Questions Prepare with Free Demo of PDF [Q17-Q39]

By adminOn August 22, 2025

Rate this post

[UPDATED 2025] CheckPoint 156-836 Questions Prepare with Free Demo of PDF

NEW 2025 Certification Sample Questions 156-836 Dumps & Practice Exam

Q17. HealthCheck Point _____

is a self-updatable suite of tools for MHOs with the capability to assess the health of the system and provide a timeline of critical and informative events that might have occurred in a production system.

performs a system health check and is meant to replace both a CPInfo and the health check script.

can be used to let you visualize the Firewall topology for the SG and view live statistics, which includes throughput, problem notes, and CPU utilization.

is a self-updatable suite of tools for SGMs with the capability to assess the health of the system, visualize the Firewall topology, provide a timeline of critical and informative events that might have occurred in a production system.

Q18. What can be learned from the output of sx_api_ports_dump.py command?

Information about backplane bonds

Information about Security Groups

Orchestrator port status

Information about downlink ports only

Q19. What is a security group?

A solution for Security Gateway redundancy and Load Sharing.

A set of appliances of the same model that are collectively managed by the MHO.

A set of network interfaces and individual SGMs assigned to a logical group.

A set of objects in SmartConsole that are responsible for enforcing an access policy.

Q20. What is the purpose of RJ-45 connectors located at the front panel of the Orchestrator MHO-170?

Two Out-of-band interfaces for access to Orchestrator itself

1Gbps connectivity for Security Groups

Out-of-band interface for access to Orchestrator itself and Serial Console connector

Reserved for internal purposes. Not in use

Q21. Which command do you use to find bottlenecks in the system that are affecting performance, even functionality in some cases?

asg stat -v

asg diag verify

asg perf -v

asg monitor

Q22. What is the throughput penalty of Security Group?

Depends on the type of Appliance

1% per member

10% per Security Group with no relation to the number of members

5% per member

Q23. What happens if the SMO Master fails?

The next SGM with the current lowest SGM ID assumes the role of the SMO Master.

The Backup SMO Master will take over in the event of a failure with the SMO Master.

A failover will occur on the MHO and traffic will continue to pass.

The Security Group will no longer pass traffic and the issue must be resolved with the SMO Master.

Q24. Is it possible to define distribution mode per interface?

Yes, only for downlink interfaces

No, only for the Security Group

Yes, only for uplink interfaces

Yes, for both uplink and downlink interfaces

Q25. Which feature is used to force trusted non-F2F traffic into the fully accelerated path for handling by SecureXL.

Fast Accelerator

hypersync

rate limiting

SecureXL

Q26. What kinds of transceivers are supported on Orchestrator MHO-140?

SFP, QSFP, QSFP28

SFP+, SFP28, QSFP

SFP, SFP+, SFP28

SFP, SFP+, QSFP, QSFP28

Q27. To display processes that are consuming excessive system resources, users should use the_____ command.

asg perf -v

asg stat -v

top

asg_perf_hogs

Q28. What is the Correction Layer?

Correction Layer is a daemon which corrects errors on Backplane interfaces

Correction Layer is a mechanism which handles asymmetric connections in multi-appliance system. For example, in case of NAT

Correction Layer is a mechanism which activated in case of asymmetric routing

Correction Layer is a Layer of GAIA OS which corrects misspelled commands and allows them to execute

Q29. What Maestro component acts as a load balancer and network switch?

Security Switching Module (SSM)

Maestro Hyperscale Orchestrator (MHO)

Security Group (SG)

Security Gateway Module (SGM)

Q30. Each morning at 1:00 am, a series of automatic diagnostics on all the SGMs runs by automatic execution of which command?

hcp -r all

asg diag list

asg diag verify

asg perf -v

Q31. What is the purpose of Management ports located on the Rear Panel of the Orchestrator MHO-140?

1Gbps connectivity for Security Groups

Reserved for internal purposes. Not in use.

Out-of-band interfaces for access to Orchestrator itself

Additional ports used as uplinks

Q32. While looking at your system’s correction statistics, you notice you have a correction rate approaching 100 percent. Is this a problem?

A correction rate above 90 percent indicates a need to disable Layer 4 Distribution.

A correction rate approaching 100 percent of all connections is unusual. This is a cause for concern because the SGMs may fail to process traffic.

If correction rates are higher than 80 percent, latency is expected.

In some scenarios, a correction rate approaching 100 percent of all connections is not unusual. This is not usually a cause for concern as the correction mechanism is fast and efficient.

Q33. Where should sx_api_ports_dump.py command be ran?

Management server

Security Group

Orchestrator

SMO Appliance

Q34. Complete the sentence: Dual Orchestrators work as.______

Load Sharing cluster

Active-Active cluster

Active – Standby cluster

Hot-Swap RAID

Q35. The drop_monitor command is useful for

Monitoring Check Point code drops

Viewing all interface drops such as RX-ERR, RX-DRP, and RX-OVR

Viewing all drops by Check Point code or the Gaia OS, such as RX-DRP, RX-ERR, and Gaia OS drops.

Showing the system temperature in real-time for multiple components, such as CPU, fan, and SSDs.

Q36. How does HyperSync work in a Dual Site environment?

Each active connection has two local backups (on the local site) and a third backup connection on the second site (remote site.)

Each active connection has a backup connection on the second site (remote site.)

Each active connection has a local backup (on the local site) and a second backup connection on the second site (remote site.)

Each active connection has a local backup (on the local site) and a second backup connection on each of the MHOs.

Q37. What does asg monitor command do?

This command does not exist

Monitor health status of entire system

Monitor traffic on Appliances in Security Group

Show real-time cluster status of Appliances in Security Group

Q38. What happens when you make changes from Clish on the SMO Master?

The changes are synchronized to the SMS/MDS as a backup.

The changes are synchronized to the MHO as a backup.

Changes are only applied on the SMO Master.

Changes are applied to all members in the SG.

Q39. What is the purpose of g_tcpdump command?

Collects traffic dump from all Active Appliances within Security Group

Collects traffic dump from CIN network

Collects traffic dump from Sync network

The same as tcpdump, just on Scalable Platform

156-836 Deluxe Study Guide with Online Test Engine: https://www.testkingit.com/CheckPoint/latest-156-836-exam-dumps.html

[UPDATED 2025] CheckPoint 156-836 Questions Prepare with Free Demo of PDF [Q17-Q39]

Leave a Reply Cancel reply