[2024] Easy To Download 350-801 Actual Exam Dumps Resources

Uplift Your 350-801 Exam Marks With The Help of 350-801 Dumps

Career Opportunities

Once you pass the Cisco 350-801 exam and get certified, you can apply for numerous job roles, which include the following options:

• Senior voice engineer

  The responsibilities of a senior voice engineer include delivering voice infrastructure solutions in complex enterprise environments, configuring and implementing Cisco messaging platforms and Cisco VOIP, and resolving challenging incidents at the expert level. The average annual pay for these professionals is $128k, according to ZipRecruiter.

• Network engineers

  Network engineers set up, develop, and maintain computer networks. They offer continued support to their customers, staff, and suppliers based on the requirements of the organization and can also troubleshoot arising issues. According to PayScale.com. the average pay for network engineers is $75k per year.

• Unified communications engineers

  Unified communications engineers are responsible for installing, configuring, optimizing, and maintaining IP telephony systems. These individuals can also troubleshoot operating systems, networks, and other application issues for complex cloud-centered communications. The average annual salary for Unified Communications Engineers is $78k, as stated on PayScale.

To prepare for the Cisco 350-801 exam, candidates can take advantage of a variety of resources, including Cisco’s official training courses, online study materials, and practice exams. It is also recommended that candidates have hands-on experience with the technologies covered in the exam, as this will help them to better understand the concepts and principles involved. With the right preparation and dedication, candidates can successfully pass the Cisco 350-801 exam and advance their careers in the field of collaboration technologies.

QUESTION 69
Refer to the exhibit. How must the +E.164 translation pattern be configured to reach international number 496929810?

 Pattern= +.496929810, CSS=Unrestricted-CSS, PreDot, Prefix=777011

 Pattem= +.777011496929810, CSS=Intl_CSS

 Pattern= +.011496929810, CSS=Global-CSS, PreDot, Prefix=777

 Pattern= +.496929810, CSS=Intl_CSS, PreDot, Prefix=777011

B is incorrect since it doesn’t state in the answer that the translation pattern will discard the
“Pre.Dot”, which means the final pattern will have the “+” sign at the beginning which will not match the route pattern in the screenshot which doesn’t have a “+” sign, however if we use the translation pattern in Answer D we will be able to achieve that since the “+” will be discarded and
777011 will be prefixed so the final pattern will be 777011496929810 == Match.

QUESTION 70
An engineer is asked to implement on-net/off-net call classification in Cisco UCM.
Which two components are required to implement this configuration? (Choose two)

 SIP trunk

 CTI route point

 route group

 route pattern

 SIP route patterns

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_5_2/ccmfeat/CUCM_BK_ C3A84B33_00_cucm-feature-configuration- guide_1052/CUCM_BK_C3A84B33_00_cucm- feature-configuration-guide_chapter_0100010.html

QUESTION 71
Which type of message must an administrator configure in the SIP Trunk Security Profile for a Message Waiting Indicator light to work with a SIP integration between Cisco UCM and Cisco Unity Connection?

 TCP port 5060

 SIP Register

 Unsolicited NOTIFY

 200 OK

https://community.cisco.com/t5/collaboration-voice-and-video/understanding-troubleshooting- mwi-on-unity-connection/ta-p/3162948

QUESTION 72
Refer to the exhibit.

When making a call to a MRA client, what are the combinations of protocol on each of the different sections A-B-C?

 IP TCP/TLS(A) +SIP TCP/TLS (B) +TLS (C)

 SIP TLS (A) +SIP TLS (B) +SIP TLS (C)

 SIP TCP/TLS (A) + SIP TLS (B) + SIP TLS (C)

 SIP TCP/TLS +SIP TCP/TLS (B) + SIP TCP/TLS (C)

QUESTION 73
Refer to the exhibit.

Endpoint A calls endpoint B.
What is the only audio codec that can be used for the call?

 G277/8000

 PCMA/8000

 Telephone-event/8000

 G7221/16000

QUESTION 74
Which issue can occur if QoS is not Deployed on a Cisco Collaboration architecture across the WAN?

 Unexpected shut-down on Cisco Unified Communications Manager

 Packet fragmentation

 403 Forbidden errors on SIP calls

 Excessive jitter

QUESTION 75
What happens to voice packets from a Cisco 8845 IP phone in the QoS trust boundary?

 The voice packets are not trusted, and the access layer switch reclassifies the packets.

 The voice packets are classified by the phone, and the classification is accepted.

 The phone and access layer switch negotiate the classification of packets.

 Cisco UCM determines how the voice packets are classified.

QUESTION 76
What is a valid class included in the 8-Class QoS Strategy in a VoIP network?

 Assured Forwarding

 Broadcast Video

 Multimedia Conferencing

 Real-Time Interactive

Section: QoS
Explanation/Reference: https://www.ciscopress.com/articles/article.asp?p=2756478&seqNum=8

QUESTION 77
Location-based call admission control is used in Cisco UCM to control the amount of bandwidth allowed between predefined locations. What must be considered when calculating the number of calls that can be made?

 A limit of 900 kb is the total amount of bandwidth used for the sum of the media and signaling in the calls. The system allows for an actual of 20% overhead of IP packet headers. This is to compare the use of ISDN lines with no IP overhead.

 A limit of 900 kb Is the total amount of bandwidth used for the sum of calls of the defined codec including headers and media traffic.

 A limit of 900 kb is the total amount of bandwidth used for the sum of calls. The use of compression does not impact the amount of calls because only the codec definition is considered when calculating the CAC in Cisco UCM.

 A limit of 900 kb is the total amount of actual used RTP traffic so the oversubscription can be done for multiple calls adding Its maximum RTP stream requirements.

QUESTION 78
What are two features of Cisco Expressway that the customer gets if Expressway-C and Expressway-E are deployed? (Choose two.)

 highly secure firewall-traversal technology to extend organizational reach

 complete endpoint registration and monitoring capabilities for devices that are local and remote

 session-based access to comprehensive collaboration for remote workers, without the need for a separate VPN client

 additional visibility of the edge traffic in an organization

 utilization and adoption metrics of all remotely connected devices

QUESTION 79
An engineer must configure an MGCP gateway and register it to Cisco Unified Communications Manager.
Which prerequisite must be met before applying the gateway commands to enable MGCP?

 The MGCP gateway and the Cisco Unified CM must be able to communicate aver ports 5060 and 5061.

 Cisco Unified CM and the MGCP gateway must utilize the SIP OPTIONS ping feature to monitor status.

 The MGCP gateway must have voice service VoIP configured.

 The MGCP gateway and the Cisco Unified CM must be able to communicate over ports 2427, 2428, and
2727.

Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios/voice/cminterop/configuration/guide/12_4t/ vc_12_4t_book/vc_ucm_mgcp_gw.html

QUESTION 80
What is the maximum one-way latency and jitter tor voice before quality issues arise?

 ≤ 150 ms Latency and ≤ 30 ms jitter

 ≤ 100 ms Latency and ≤ 10 ms jitter

 ≤ 300 ms Latency and ≤ 60 ms jitter

 ≤ 90 ms Latency and ≤ 30 ms jitter

QUESTION 81
What is the most efficient way to configure a speed dial to number 1111 on multiple phones using the Self-Provisioning feature in Cisco UCM?

 Configure each phone with the same DN and then configure a speed dial of 1111 on one of the phones manually by navigating to Devices>Phones and modifying the phone. This will automatically replicate to all the other phones.

 Configure the phones with a phone button template that has speed dials then specify 1111 as a speed dial via BAT>Phones>Add/Update phones web page to specify the speed dial number after the phone is in Cisco UCM.

 Configure a universal device template that has speed dials in the phone button configuration field, then allow the user to specify 1111 as a speed dial via the Cisco Unified Communications Self Care Portal.

 Configure a universal device template that has speed dials in the phone button configuration field, then specify 1111 as a speed dial by editing the speed dial within the universal device template.

QUESTION 82
What is a reason for using a Diffserv value of AF41 for video traffic?

 Video traffic cannot tolerate any packet loss and has a latency of 150 miliseconds

 Video traffic can tolerate up to 10% packet loss and latency of 10 seconds

 Video trafic can tolerate up to 5% packet loss and latency of 5 seconds

 Video traffic can tolerate a packet loss of up to 1% and latency of 150 milliseconds

QUESTION 83
Where is the default for maximum session Bit Rate for a region configured?

 Region configuration

 Enterprise Phone configuration

 Service parameter configuration

 Enterprise parameters configuration

QUESTION 84
Refer to the exhibit.

Refer to the exhibit. An administrator must fix the SRV records to ensure that server1. sample.com is always contacted first from the three servers. Which solution should the engineer apply to resolve this issue?

 Priority = 100, Weight = 90

 Priority = 10, Weight = 5

 Priority = 10, Weight = 10

 Priority = 5, Weight = 70

 Loading …

Cisco 350-801 Exam and Its Target

The Cisco 350-801 exam is designed mainly for the network engineers, systems engineers, and network administrators who want to improve their professional expertise to move their career forwards.

The IT specialists who are going to pass the Cisco 350-801 exam should first make sure that they possess the requisite knowledge and skills. They must be able to implement and handle basic collaboration technologies that include collaboration applications, QoS, Call Control, media resources, Cisco IOS gateway, and codecs and endpoints. Their skills in implementing and deploying key collaboration technologies will be an added advantage.

Additionally, the students should demonstrate a specializing knowledge of the basic computer networking terms, including routing, switching, LANs, and WANs. Moreover, they must have a thorough understanding of the fundamentals of digital interfaces, Voice over IP (VoIP), and Public Switched Telephone Networks (PSTNs). The applicants should also have the general familiarity with Cisco Unified Communications Manager deployment, data networks, and voice.

Use Cisco 350-801 Dumps To Succeed Instantly in 350-801 Exam: https://www.testkingit.com/Cisco/latest-350-801-exam-dumps.html

Related Links: www.stes.tyc.edu.tw myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt www.stes.tyc.edu.tw myportal.utt.edu.tt