[Q28-Q44] Exam 100-101 Realistic Dumps Verified Questions Free [Mar 29, 2024]

By adminOn March 29, 2024

4.7/5 - (3 votes)

Exam 100-101 Realistic Dumps Verified Questions Free [Mar 29, 2024]

Valid 100-101 Dumps for Helping Passing Facebook Exam!

NO.28 What is the purpose of assigning an IP address to a switch?

provides local hosts with a default gateway address

allows remote management of the switch

allows the switch to respond to ARP requests between two hosts

ensures that hosts on the same LAN can communicate with each other

NO.29 Refer to the exhibit.

The network administrator is testing connectivity from the branch router to the newly installed application server. What is the most likely reason for the first ping having a success rate of only 60 percent?

The network is likely to be congested, with the result that packets are being intermittently dropped.

The branch router had to resolve the application server MAC address.

There is a short delay while NAT translates the server IP address.

A routing table lookup delayed forwarding on the first two ping packets.

The branch router LAN interface should be upgraded to FastEthernet.

NO.30 Which statement is true?

An IPv6 address is 64 bits long and is represented as hexadecimal characters.

An IPv6 address is 32 bits long and is represented as decimal digits.

An IPv6 address is 128 bits long and is represented as decimal digits.

An IPv6 address is 128 bits long and is represented as hexadecimal characters.

NO.31 What is the best practice when assigning IP addresses in a small office of six hosts?

Use a DHCP server that is located at the headquarters.

Use a DHCP server that is located at the branch office.

Assign the addresses by using the local CDP protocol.

Assign the addresses statically on each node.

NO.32 A business selects Engagement as its campaign objective.
Which action would the business want its customers to take?

Like a post

Visit its website

Remember an ad

Make a purchase

NO.33 Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0? (Choose two.)

Router(config)# router ospf 0

Router(config)# router ospf 1

Router(config)# router ospf area 0

Router(config-router)# network 192.168.16.0 0.0.0.255 0

Router(config-router)# network 192.168.16.0 0.0.0.255 area 0

Router(config-router)# network 192.168.16.0 255.255.255.0 area 0

NO.34 Which protocol uses a connection-oriented service to deliver files between end systems?

TFTP

DNS

FTP

SNMP

RIP

NO.35 Refer to the exhibit.

Given the output for this command, if the router ID has not been manually set, what router ID will OSPF use for this router?

10.1.1.2

10.154.154.1

172.16.5.1

192.168.5.3

NO.36 CORRECT TEXT

Which two of the following are true regarding the configuration of RouterA? (Choose two.)

at least 5 simultaneous remote connections are possible

only telnet protocol connections to RouterA are supported

remote connections to RouterA using telnet will succeed

console line connections will nevertime out due to inactivity

since DHCP is not used on FaO/1 there is not a need to use the NAT protocol

NO.37 Scenario
Refer to the topology. Your company has decided to connect the main office with three other remote branch offices using point-to-point serial links.
You are required to troubleshoot and resolve OSPF neighbor adjacency issues between the main office and the routers located in the remote branch offices.

R1 does not form an OSPF neighbor adjacency with R2. Which option would fix the issue?

R1 ethernetO/1 is shutdown. Configure no shutdown command.

R1 ethernetO/1 configured with a non-default OSPF hello interval of 25: configure no ip ospf hello-interval 25

R2 ethernetO/1 and R3 ethernetO/O are configured with a non-default OSPF hello interval of 25; configure no ip ospf hello-interval 25

Enable OSPF for R1 ethernetO/1; configure ip ospf 1 area 0 command under ethernetO/1

NO.38 At which layer of the OSI model does the protocol that provides the information that is displayed by the show cdp neighbors command operate?

application

transport

network

physical

data link

NO.39 Which two of these functions do routers perform on packets? (Choose two.)

Examine the Layer 2 headers of inbound packets and use that information to determine the next hops for the packets

Update the Layer 2 headers of outbound packets with the MAC addresses of the next hops

Examine the Layer 3 headers of inbound packets and use that information to determine the next hops for the packets

Examine the Layer 3 headers of inbound packets and use that information to determine the complete paths along which the packets will be routed to their ultimate destinations

Update the Layer 3 headers of outbound packets so that the packets are properly directed to valid next hops

Update the Layer 3 headers of outbound packets so that the packets are properly directed to their ultimate destinations

NO.40 What is the subnet address of 172.16.159.159/22?

172.16.0.0

172.16.128.0

172.16.156.0

172.16.159.0

172.16.159.128

172.16.192.0

NO.41 In which major section of Ads Manager (found in the top navigation bar) would you prepare mockup ad campaigns?

Manage Business

Advertise

Engage Customers

NO.42 Which two statements describe the IP address 10.16.3.65/23? (Choose two.)

The subnet address is 10.16.3.0 255.255.254.0.

The lowest host address in the subnet is 10.16.2.1 255.255.254.0.

The last valid host address in the subnet is 10.16.2.254 255.255.254.0

The broadcast address of the subnet is 10.16.3.255 255.255.254.0.

The network is not subnetted.

NO.43 An administrator must assign static IP addresses to the servers in a network. For network 192.168.20.24/29, the router is assigned the first usable host address while the sales server is given the last usable host address.
Which of the following should be entered into the IP properties box for the sales server?

IP address: 192.168.20.14 Subnet Mask: 255.255.255.248 Default Gateway: 192.168.20.9

IP address: 192.168.20.254 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.20.1

IP address: 192.168.20.30 Subnet Mask: 255.255.255.248 Default Gateway: 192.168.20.25

IP address: 192.168.20.30 Subnet Mask: 255.255.255.240 Default Gateway: 192.168.20.17

IP address: 192.168.20.30 Subnet Mask: 255.255.255.240 Default Gateway: 192.168.20.25

NO.44 On a Cisco switch, which protocol determines if an attached VoIP phone is from Cisco or from another vendor?

RTP

TCP

CDP

UDP

100-101 Exam Dumps For Certification Exam Preparation: https://www.testkingit.com/Facebook/latest-100-101-exam-dumps.html

[Q28-Q44] Exam 100-101 Realistic Dumps Verified Questions Free [Mar 29, 2024]

Leave a Reply Cancel reply