Accurate Hot Selling C-HANATEC-18 Exam Dumps 2023 Newly Released [Q43-Q63]

By adminOn October 17, 2023

Rate this post

Accurate Hot Selling C-HANATEC-18 Exam Dumps 2023 Newly Released

Get 100% Authentic SAP C-HANATEC-18 Dumps with Correct Answers

SAP C-HANATEC-18 certification exam is a comprehensive test that covers a wide range of topics related to SAP HANA 2.0 SPS06. Some of the key topics covered in the exam include data modeling, database administration, security, performance optimization, and troubleshooting. To pass the exam, candidates must demonstrate a deep understanding of these topics and be able to apply their knowledge in real-world scenarios.

Q43. You are performing a database migration option (DMO) procedure and applying SAP support packages in combination as an in-place migration. Which steps take place during downtime? Note: There are 2 correct answers to this question.

Activation of dictionary objects in phase ACT UPG

XPRAS execution in phase XPRAS AIMMRG

Migration of application tables in phase EL) CLONE MIG DT RUN

Creation of application tables in the target database in phase EU CLONE MIG DT CREATE

Q44. Which replication modes keep the primary system waiting until a timeout is exceeded when the secondary system is not available? Note: There are 2 correct answers to this question.

ASYNC

SYNCMEM

FULL SYNC

SYNC

Q45. Which backup types can you schedule using the backup scheduler in the SAP HANA cockpit? Note: There are 2 correct answers to this question.

Delta backup

Full backup

Fallback snapshot

Data snapshot

Q46. What is the recommended size for the log volume file system for a 512 GB SAP HANA database system?

614 GB

256 GB

512 GB

427 GB

Q47. Which technology is used to install the SAP Landscape Management tool?

SAP Fiori launchpad

SAP NetWeaver Application Server for Java

SAP HANA XS advanced runtim

SAP NetWeaver Application Server for ABAP

Q48. Which file systems are supported for the data and log volumes of the SAP HANA 2.0 database system? Note: There are 2 correct answers to this question.

Btrfs

OCFS2

GPFS

xfs

Q49. Which table holds the data used for the dynamic management of partitions and locations?

TABLE GROUP

UPDATE LANDSCAPE CONFIGURATION

TABLE PLACEMENT

EFFECTIVE TABLE PLACEMENT

Q50. In which situations can you resume the failed recovery of your productive SAP HANA tenant database? Note: There are 2 correct answers to this question.

An aborted recovery of a delta data backup

An aborted recovery of a log backup

An aborted recovery of a complete data backup

An aborted recovery of the configuration files

Q51. For an SAP HANA tailored datacenter integration (TDI) approach, what is the additional disk space factor required during delta merge operations?

3.0

1.6

2.0

1.2

Q52. Which tasks can you perform when using the SAP HANA database lifecycle manager (HDBLCM) from the SAP HANA installation media? Note: There are 2 correct answers to this question.

Uninstall the SAP HANA database system and its components

Rename the SAP HANA database system.

Update the SAP HANA database system and its components.

Extract the SAP HANA database system components.

Q53. Which system usage types are automatically assigned to tiles in the SAP HANA cockpit? Note: There are 3 correct answers to this question.

Quality assurance

Test

Development

Custom

Production

Q54. Which activities do you have to carry out to configure your multitenant database container (MDC) system to a higher database isolation level between tenant databases on the operating system (OS)? Note: There are 3 correct answers to this question.

Add dedicated tenant OS users to the <sid>shm group.

Lock the <sid>adm OS user.

Remove the <sid>adm OS user from the sapsys group.

Add dedicated tenant OS users to the sapsys group.

Create dedicated tenant OS users for each tenant

Q55. What action(s) can you perform in the SAP HANA cockpit to back up the complete database system?

Back up the system using a fallback snapshot for every database

Back up the system using a database snapshot and a data snapshot.

Back up the system database and all tenant databases in one step

Back up the system database and all tenant databases individually

Q56. You are running a database migration option (DMO) procedure using in-place migration Where are the reading and writing R3load processes located during the actual migration?

The reading processes run on the source database host; the writing processes run on the target database host.

All of the reading and writing processes run on the target database host

The reading processes run on the primary application server (PAS) host; the writing processes run on the target database host.

All of the reading and writing processes run on the primary application server (PAS) host.

Q57. How does SAP HANA encrypt the data persistence layer?

By column level

By page level

By table level

By row level

Q58. Which prerequisites must be fulfilled to rename a tenant database in the SAP HANA cockpit? Note: There are 2 correct answers to this question.

The tenant database is stopped

The tenant database must be unloaded from memory

The on-disk tenant directory should be a mount point

The tenant database is not part of a move operation.

Q59. The SAP HANA database system is not available through the SQL interface. Which options do you have to collect information to monitor connections, transactions, blocked transactions, and threads? Note: There are 2 correct answers to this question.

Troubleshoot unresponsive systems

PerfTrace.py

emergencylnfo_py

Manage full system information dumps

Q60. You are registering an SAP HANA database resource using SAP HANA cockpit manager. Which privileges are automatically assigned when you initially create the COCKPIT MONITOR technical user? Note: There are 2 correct answers to this question.

DATABASE ADMIN

SELECT on the SYS TELEMETRY schema

CATALOG RAED

SELECT on the SYS STATISTICS schema

Q61. Who owns an SAP HANA Deployment Infrastructure (HDI) role?

The container-specific technical user

The SYSTEM user of the tenant database

The SYS REPO technical user

The user who created the role

Q62. How can you ensure that a consistent database status is saved using data snapshots?

Trigger a savepoint.

Create a fallback snapshot

Execute the hdbbackupdiag tool

Create an internal database snapshot

Q63. Which characteristics describe an SAP HANA multitenant database container (MDC) system? Note: There are 3 correct answers to this question.

A multitenant database container system is identified by a single system ID (SID).

Database isolation increases the isolation between tenant databases on operating system level

Each tenant database runs its own compile server and the preprocessor server.

The name server owns information about the location of tables and table partitions in databases.

The name server provides index server functionality for the system database.

Loading …

SAP C-HANATEC-18 certification exam is a valuable credential for individuals who wish to become certified in SAP HANA 2.0 SPS06. Certified Application Associate – SAP HANA 2.0 SPS06 certification exam is challenging and covers a wide range of topics related to SAP HANA. If you wish to take the exam, it is important to prepare thoroughly and to ensure that you have a good understanding of SAP HANA 2.0 SPS06 and its various features.

Dumps of C-HANATEC-18 Cover all the requirements of the Real Exam: https://www.testkingit.com/SAP/latest-C-HANATEC-18-exam-dumps.html

C-HANATEC-18, SAPC-HANATEC-18 latest real test, C-HANATEC-18 latest test sims, C-HANATEC-18 new exam dumps demo, C-HANATEC-18 premium exam, C-HANATEC-18 reliable new exam format, C-HANATEC-18 reliable real exam questions, new C-HANATEC-18 exam test, new C-HANATEC-18 exam tutorial

Accurate Hot Selling C-HANATEC-18 Exam Dumps 2023 Newly Released [Q43-Q63]

Leave a Reply Cancel reply