[Aug 03, 2022] NSE5_FMG-6.4 Dumps PDF and Test Engine Exam Questions – TestKingIT [Q24-Q47]

By adminOn August 3, 2022

5/5 - (1 vote)

[Aug 03, 2022] NSE5_FMG-6.4 Dumps PDF and Test Engine Exam Questions – TestKingIT

Verified NSE5_FMG-6.4 exam dumps Q&As with Correct 60 Questions and Answers

NEW QUESTION 24
What is the purpose of the Policy Check feature on FortiManager?

To find and provide recommendation to combine multiple separate policy packages into one common policy package

To find and merge duplicate policies in the policy package

To find and provide recommendation for optimizing policies in a policy package

To find and delete disabled firewall policies in the policy package

NEW QUESTION 25
Which two items are included in the FortiManager backup? (Choose two.)

FortiGuard database

Global database

Logs

All devices

NEW QUESTION 26
View the following exhibit.

Which statement is true regarding this failed installation log?

Policy ID 2 is installed without a source address

Policy ID 2 will not be installed

Policy ID 2 is installed in disabled state

Policy ID 2 is installed without a source device

NEW QUESTION 27
Refer to the exhibit.

You are using the Quick Install option to install configuration changes on the managed FortiGate.
Which two statements correctly describe the result? (Choose two.)

It will not create a new revision in the revision history

It installs device-level changes to FortiGate without launching the Install Wizard

It cannot be canceled once initiated and changes will be installed on the managed device

It provides the option to preview configuration changes prior to installing them

NEW QUESTION 28
View the following exhibit.

When using Install Config option to install configuration changes to managed FortiGate, which of the following statements are true? (Choose two.)

Once initiated, the install process cannot be canceled and changes will be installed on the managed device

Will not create new revision in the revision history

Installs device-level changes to FortiGate without launching the Install Wizard

Provides the option to preview configuration changes prior to installing them

NEW QUESTION 29
An administrator has enabled Service Access on FortiManager.
What is the purpose of Service Access on the FortiManager interface?

Allows FortiManager to download IPS packages

Allows FortiManager to respond to request for FortiGuard services from FortiGate devices

Allows FortiManager to run real-time debugs on the managed devices

Allows FortiManager to automatically configure a default route

NEW QUESTION 30
Which two conditions trigger FortiManager to create a new revision history? (Choose two.)

When configuration revision is reverted to previous revision in the revision history

When FortiManager installs device-level changes to a managed device

When FortiManager is auto-updated with configuration changes made directly on a managed device

When changes to device-level database is made on FortiManager

NEW QUESTION 31
What does a policy package status of Modified indicate?

FortiManager is unable to determine the policy package status

The policy package was never imported after a device was registered on FortiManager

The Policy configuration has been changed on a managed device and changes have not yet been imported into FortiManager

The Policy package configuration has been changed on FortiManager and changes have not yet been installed on the managed device.

NEW QUESTION 32
View the following exhibit.

Which one of the following statements is true regarding the object named ALL?

FortiManager updated the object ALL using FortiGate’s value in its database

FortiManager updated the object ALL using FortiManager’s value in its database

FortiManager created the object ALL as a unique entity in its database, which can be only used by this managed FortiGate.

FortiManager installed the object ALL with the updated value.

NEW QUESTION 33
What is the purpose of ADOM revisions?

To create System Checkpoints for the FortiManager configuration.

To save the current state of the whole ADOM.

To save the current state of all policy packages and objects for an ADOM.

To revert individual policy packages and device-level settings for a managed FortiGate by reverting to a specific ADOM revision

NEW QUESTION 34
Which two statements about Security Fabric integration with FortiManager are true? (Choose two.)

The Security Fabric license, group name and password are required for the FortiManager Security Fabric integration

The Fabric View module enables you to generate the Security Fabric ratings for Security Fabric devices

The Security Fabric settings are part of the device level settings

The Fabric View module enables you to view the Security Fabric ratings for Security Fabric devices

NEW QUESTION 35
An administrator’s PC crashes before the administrator can submit a workflow session for approval. After the PC is restarted, the administrator notices that the ADOM was locked from the session before the crash.
How can the administrator unlock the ADOM?

Restore the configuration from a previous backup.

Delete the previous admin session manually through the FortiManager GUI or CLI.

NEW QUESTION 36
Which of the following statements are true regarding schedule backup of FortiManager? (Choose two.)

Backs up all devices and the FortiGuard database.

Does not back up firmware images saved on FortiManager

Supports FTP, SCP, and SFTP

Can be configured from the CLI and GUI

NEW QUESTION 37
Refer to the exhibit.

An administrator has configured the command shown in the exhibit on FortiManager. A configuration change has been installed from FortiManager to the managed FortiGate that causes the FGFM tunnel to go down for more than 15 minutes.
What is the purpose of this command?

It allows FortiGate to unset central management settings.

It allows FortiGate to reboot and recover the previous configuration from its configuration file.

It allows the FortiManager to revert and install a previous configuration revision on the managed FortiGate.

It allows FortiGate to reboot and restore a previously working firmware image.

NEW QUESTION 38
Refer to the exhibit.

Given the configuration shown in the exhibit, which two statements are true? (Choose two.)

It allows two or more administrators to make configuration changes at the same time, in the same ADOM.

It disables concurrent read-write access to an ADOM.

It allows the same administrator to lock more than one ADOM at the same time.

It is used to validate administrator login attempts through external servers.

NEW QUESTION 39
Which two items does an FGFM keepalive message include? (Choose two.)

FortiGate uptime

FortiGate license information

FortiGate IPS version

FortiGate configuration checksum

NEW QUESTION 40
Which two statements regarding device management on FortiManager are true? (Choose two.)

FortiGate devices in HA cluster devices are counted as a single device.

FortiGate in transparent mode configurations are not counted toward the device count on FortiManager.

FortiGate devices in an HA cluster that has five VDOMs are counted as five separate devices.

The maximum number of managed devices for each ADOM is 500.

NEW QUESTION 41
An administrator configures a new firewall policy on FortiManager and has not yet pushed the changes to the managed FortiGate.
In which database will the configuration be saved?

Device-level database

Revision history database

ADOM-level database

Configuration-level database

NEW QUESTION 42
View the following exhibit:

How will FortiManager try to get updates for antivirus and IPS?

From the list of configured override servers with ability to fall back to public FDN servers

From the configured override server list only

From the default server fdsl.fortinet.com

From public FDNI server with highest index number only

NEW QUESTION 43
An administrator has assigned a global policy package to custom ADOM1. Then the administrator creates a new policy package, Fortinet, in the custom ADOM1.
Which statement about the global policy package assignment to the newly-created policy package Fortinet is true?

When a new policy package is created, it automatically assigns the global policies to the new package.

When a new policy package is created, you need to assign the global policy package from the global ADOM.

When a new policy package is created, you need to reapply the global policy package to the ADOM.

When a new policy package is created, you can select the option to assign the global policies to the new package.

NEW QUESTION 44
Which configuration setting for FortiGate is part of a device-level database on FortiManager?

VIP and IP Pools

Firewall policies

Security profiles

Routing

NEW QUESTION 45
In addition to the default ADOMs, an administrator has created a new ADOM named Training for FortiGate devices. The administrator sent a device registration to FortiManager from a remote FortiGate. Which one of the following statements is true?

The FortiGate will be added automatically to the default ADOM named FortiGate.

The FortiGate will be automatically added to the Training ADOM.

By default, the unregistered FortiGate will appear in the root ADOM.

The FortiManager administrator must add the unregistered device manually to the unregistered device

NEW QUESTION 46
Refer to the following exhibit:

Which of the following statements are true based on this configuration? (Choose two.)

The same administrator can lock more than one ADOM at the same time

Ungraceful closed sessions will keep the ADOM in a locked state until the administrator session times out

Unlocking an ADOM will submit configuration changes automatically to the approval administrator

Unlocking an ADOM will install configuration automatically on managed devices

NEW QUESTION 47
What will be the result of reverting to a previous revision version in the revision history?

It will install configuration changes to managed device automatically

It will tag the device settings status as Auto-Update

It will generate a new version ID and remove all other revision history versions

It will modify the device-level database

Fortinet NSE5_FMG-6.4 Test Engine PDF – All Free Dumps: https://www.testkingit.com/Fortinet/latest-NSE5_FMG-6.4-exam-dumps.html

[Aug 03, 2022] NSE5_FMG-6.4 Dumps PDF and Test Engine Exam Questions – TestKingIT [Q24-Q47]

Leave a Reply Cancel reply