Guaranteed Accomplishment with Newest Sep-2026 FREE Cisco 350-601 [Q14-Q30]

By adminOn September 23, 2026

4.5/5 - (2 votes)

Guaranteed Accomplishment with Newest Sep-2026 FREE Cisco 350-601

Use Valid New Free 350-601 Exam Dumps & Answers

Cisco 350-601 Exam Syllabus Topics:

Section	Weight	Objectives
Storage Network (20%)	20%	– Zoning and Device Aliases – Storage Area Network (SAN) Design – Fibre Channel and FCoE – Storage Network Services
Network (25%)	25%	– Switching and Routing Protocols – First Hop Redundancy Protocols – Data Center Interconnect – AAA and Security – Overlay Technologies (VXLAN, OTV, LISP)
Security (15%)	15%	– ACI Security – Endpoint Security – Firewalls and IPS/IDS – Network Security Concepts
Automation (15%)	15%	– Network Programmability – Python Scripting for APIs – Cloud Management – Cisco ACI
Compute (25%)	25%	– Service Profiles and Pools – Server Virtualization – SAN/LAN Connectivity – Cisco Unified Computing System (UCS)

QUESTION 14
An engineer must connect a Cisco UCS appliance port directly to NFS and iSCSI storage devices. Which action should be taken to achieve this goal?

Configure NFS and iSCSI to use the same VLAN tag on the appliance port

Configure the appliance ports in access mode and apply VLAN tagging on the storage

Configure the appliance ports in trunk mode and apply VLAN tagging on the storage

Configure VLAN tagging on the storage and the Cisco UCS simultaneously

QUESTION 15
Which statement describes monitoring Fibre Channel traffic on a Cisco UCS 6332 Fabric Interconnect?

Fibre Channel traffic is monitored only on one vHBA per server.

The destination port for monitoring must be an unassigned Fibre Channel port.

The monitoring of Fibre Channel traffic is limited to the default VSAN.

Fibre Channel traffic is capable to be monitored as it is encapsulated as FCoE.

QUESTION 16
Which feature must be enabled to support the use of JSON and XML encoding when a Cisco Nexus 7000 series switch is deployed?

NX-API

LLDP

Open Agent Container

Bash shell

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/programmability/guide/ cisco_nexus7000_programmability_guide_8x/b-cisco-nexus7000-programmability-guide-
8x_chapter_011.html

QUESTION 17
In an FCoE environment, for which two sets of data must an interface that implements the PAUSE mechanism always provision sufficient ingress buffer? (Choose two.)

frames that were sent with high credit

frames that were sent on the link but not yet received

frames that were processed and transmitted by the transmitter after the PAUSE frame left the sender

frames that were processed and transmitted by the transmitter before the PAUSE frame left the sender

frames that were sent on the link and received

In case of congestion, the long distance ingress ports sends a pause frame to its peer to pause all data transmission on the link for a specified period of time in order to absorb the in-flight packets.
When a pause frame is generated from a switch, it takes time to reach the peer switch. Until the packet reaches to peers all the in-flight packets need to be buffered and should not be dropped.
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/configuration/guides
/qos/nx-os/qos_bk/qos_pfc.pdf

QUESTION 18
Refer to the exhibit.

Which type of backup is required to restore a Cisco UCS configuration?

full state

system configuration

logical configuration

all configuration

QUESTION 19
An engineer must configure a Nexus 7000 series switch for HSRP on VLAN 100. When fully functional, the router must be the active master. Which set of commands must be used to implement the scenario?

Option A

Option B

Option C

Option D

QUESTION 20
An engineer must upgrade the server firmware for which the service profile is configured with a host firmware package. Which action must be taken to accomplish this goal?

Disassociate the service profile from the server and upgrade.

Change the maintenance policy to user-ack and upgrade.

Upgrade the server through the host firmware package.

Perform a direct upgrade on the server using Auto Install.

You can use firmware packages in service profiles to upgrade the server and adapter firmware, including the BIOS on the server, by defining a host firmware policy and including it in the service profile associated with a server.

QUESTION 21
All logins to a Cisco Nexus 9000 Series Switch must pass through the TACACS+ server at IP address
192.168.10.10. The configuration must meet these requirements:
* The TACACS+ server must be used for SSH and Telnet.
* The TACACS+ server key must be Cisco123!.
* Management VRF must be used for connectivity.
* The deployment must fail back to local credentials if the TACACS+ server fails to respond within 30 seconds.
Drag and drop the code snippets from the right onto the blanks in the code on the left to complete the configuration. Not all code snippets are used.

QUESTION 22
A network engineer must perform a backup and restore of the Cisco Nexus 5000 Series Switch configuration. The backup must be made to an external backup server. The only protocol permitted between the Cisco Nexus Series switch and the backup server is UDP. The backup must be used when the current working configuration of the switch gets corrupted. Which set of steps must be taken to meet these requirements?

1. Perform a running-config backup to an SFTP server. 2. Copy backup-config from the SFTP server to the running-config file.

1. Perform a startup-config backup to a TFTP server. 2. Copy backup-config from the backup server to the running-config file.

1. Perform a running-config backup to an SCP server. 2. Copy running-config in the boot flash to the running-config file.

1. Perform a startup-config backup to an FTP server. 2. Copy startup-config in the boot flash to the running-config file.

TFTP runs on UDP 69 = Is correct

QUESTION 23
Refer to the exhibit.

Refer to the exhibit. A network engineer is implementing a configuration checkpoint on a Cisco Nexus 9000 Series Switch. The configuration must skip any existing vPC configuration errors and must complete if there are any configuration errors. The engineer finished the vPC domain configuration part. Which command completes the checkpoint implementation?

verbose

atomic

stop-at-first-failure

best-effort

QUESTION 24
Refer to the exhibit. An engineer must upgrade the N9K_2 device to the latest code. In preparation for the upgrade, the engineer wants to divert all data plane traffic between RTR_1 and RTR_2 to N9K_4 and N9K_5. The traffic redirection must happen without forcing any OSPFv2 adjacency change in the network. Which configuration set must be used on N9K_2 OSPF process 1 to accomplish these goals?

area 0 stub no-summary

passive-interface default

max-metric router-lsa

area 0 filter-list route-map DENY_ALL out

QUESTION 25

Refer to the exhibit. A DevOps engineer must create a PowerShell script to display a list of tenants in the Cisco Application Centric Infrastructure (ACI) by using the Cisco ACI PowerShell module. The engineer does NOT know how many results will be returned, so it is important to iterate through all the results. Which code snippet completes the script?

Option A

Option B

Option C

Option D

QUESTION 26
An engineer configures port security on a Cisco MDS 9000 Series Switch. The MDS switch configuration must meet these requirements The switch must inmate the VSAN 4 port security database despite any conflicts.
New devices must be statically added to the switch.
Configuration changes for VSAN 4 must be applied throughout the fabric with any lodes on the fabric released Which configuration set meets these requirements?

Option B

Option A

Option C

Option D

QUESTION 27
A bridge domain is being extended out of a Cisco ACI fabric. Between which of these components are policies used to identify the connectivity between Endpoint Groups and the external connection?

an external bridge domain and an external routed domain

internal contracts and external contracts

internal EPGs and external EPGs

L2Out and L3Out

Policies that identify the connectivity between Endpoint Groups (EPGs) and the external connection when extending a bridge domain out of a Cisco ACI fabric are associated with L2Out and L3Out components.
L2Outs are used to extend Layer 2 connectivity outside the ACI fabric, while L3Outs are used for Layer 3 external connections. These policies define how the ACI fabric will communicate with external networks

QUESTION 28
Which feature Is supported with an In-Service Software Upgrade on a Cisco Nexus 9000 Series Switch?

configuration changes during an upgrade

nondisruptive upgrades via nonstop forwarding

zero downtime downgrades via dual supervisor modules

upgrades to Individual modules and line cards

Only disruptive downgrades are supported. Non-disruptive downgrades are not supported.
https://www.cisco.com/c/en/us/td/docs/dcn/nx-os/nexus9000/101x/configuration/high-availability- and-redundancy/cisco-nexus-9000-series-nx-os-high-availability-and-redundancy-guide-101x/m- issu-and-ha.pdf

QUESTION 29
Which two actions should be taken before an upgrade is started on a Cisco MDS switch? (Choose two.)

check the impact of the upgrade using the show install all impact command

disable Cisco Fabric Services

back up the configuration

free up space on the USB3 device by deleting old Cisco NX-OS image files

make the primary supervisor the active supervisor

Before upgrading the Cisco NX-OS software on a Cisco MDS switch, it is important to perform some preparatory steps to ensure a smooth and successful upgrade process. Two of these steps are:
* Check the impact of the upgrade using the show install all impact command. This command displays the compatibility and impact matrix for the upgrade, which shows the current and target versions of the software, the modules that will be upgraded, the modules that will be reloaded, and the modules that will be powered down. This information helps to plan the upgrade and minimize the disruption to the network.
* Back up the configuration of the switch using the copy running-config startup-config command. This command saves the current running configuration to the startup configuration file, which is stored in the bootflash memory of the switch. This ensures that the configuration is preserved and can be restored in case of any issues during or after the upgrade.
References := The information is supported by the Cisco MDS 9000 NX-OS Software Upgrade and Downgrade Guide, which provides detailed instructions and guidelines for upgrading the software on a Cisco MDS switch

QUESTION 30
Drag and Drop Question
An engineer configures the netflow feature on a Cisco NX-OS device. The requirement is to reduce the amount of export data collected by using a sampler. Drag and drop the netflow configuration steps from the left onto implemented needed to meet these requirements on the right. Not all steps are used.