Q115. Refer to the exhibit.

Fiber links are provisioned directly between the spine and leaf switches in the given LAN topology A/30 prefix has been configured over each fiber link to provide underlay connectivity for a VXLAN network. The network-engineering team must update the network configuration to provide the shortest possible convergence time if a fiber link is cut. Which action must the team take to meet the requirement?

Q116. Drag and drop the configurations from the left onto the correct policies on the right.

Q117. Refer to the exhibit.

Refer to the exhibit. A network engineer must improve high availability within the given UCS infrastructure The engineer configured central nodes A and B in cluster mode to ensure that traffic fails over in the case of a network outage. Which type of redundancy will the cluster configuration provide?

Q118. A network architect designs a high-availability architecture for the Cisco UCS Fabric interconnects that installed in a data center. The architecture must support clustering and redundancy. Which architecture meets these requirements?

Q119. What should be implemented on a Cisco Nexus 9300 Series Switch to reduce oversubscription between switches within a Fibre Channel fabric?

Q120. An engineer is designing a data center that uses FCIP. How is QoS configured in this environment?

Q121.

Refer to the exhibit. An engineer builds a data center network design using EVPN technology. Within the design, the fabric acts as a gateway. Traffic from host X to host Y must pass through the Cisco ASA firewall for deep packet inspection and increased security. Which firewall deployment must the engineer choose to accomplish this goal?

Q122. A network engineer must create a Fibre Channel fabric QoS design for an existing data center.
The solution must provide relative bandwidth guarantees to application traffic, control latency, and prioritize application traffic.
Which mechanism must be deployed to support these requirements?

Q123. A network administrator must create a redundant vHBA for the mission-critical virtual machines (VMs) installed on a Cisco UCS Fabric Interconnect blade server. The VMs access multiple datastores using VSAN55 and VSAN95. The datastore on which the VMs are hosted must be accessible if any of the uplinks goes offline. Which action meets these requirements?

Q124. Refer to the exhibit.

A cloud service provider deployed three geographically separated Cisco ACI data centers. One of the customers needs to host a clustered application that is spread across the three data centers. The cluster nodes that host the application need a Layer 2 topology to communicate with each other.
Which Cisco ACI topology design meets these requirements?

Q125. Refer to the exhibit.
The Cisco Nexus Series Switch with hostname Nexus! is the default gateway for server A and server B Both servers must have reachability to the internet; however, server A internet traffic must pass through the firewall for deep packet inspection.
Also, the firewall must inspect any communication between server A and server B.
Which solution must be applied to separate the data plane path for server A and server B?

Q126. Which type fields can an engineer use to identify an iSCSI participant? (Choose two.)

Q127. Refer to the exhibit.

A Cisco UCS chassis that has two IOMs is discovered. The chassis discovery policy creates a fabric port channel. What is the result of this policy?

Q128. An engineer develops a framework for automatic repetitive tasks needed to manage a Cisco Nexus 9000 Series Switch. The engineer plans to use a programmatic interface and must keep these considerations in mind.
– The customer’s environment requires the script to authenticate before executing further actions.
– The customer’s security requirements mandate the use of HTTP
transport.
– The automation team is familiar with parsing messages encoded in XML
or JSON format.
Which solution meets these requirements?

Q129. A Cisco UCS chassis with several blade servers, a pair of IOMs, and a pair of Cisco UCS Fabric Interconnects are installed in a data center.
Which two high-availability architectures are recommended between the IOMs and fabric interconnects? (Choose two.)

Q130. A customer asks an engineer to develop a framework to configure Cisco services that will be used to replace process of manual device configuration. The engineer plans to use a programmatic interface and must keep these considerations in mind:
* The customer’s environment requires the script to authenticate before executing further actions.
* The customer’s security requirements mandate the use of HTTPS transport.
* The support stall has limited shell scripting knowledge, so the scripts should be easy to read and write and be serf-documenting.
Which two solutions should be used to meet these requirements? (Choose two.)

Q131. An engineer must interconnect two geographically separated data centers. The service provider offers a Layer 2 Metro Ethernet link. The strict security policy requires that the information that is shared between two sites must be sent encrypted. The application deployed between two sites requires a line-rate throughput regardless of the packet size and speed.
Which solution meets these requirements?

Q132. Refer to the exhibit. Due to power limitations at the customer data center, the engineering team must decommission one of the modular switches. In the new design, the customer must ensure that the OSPF process is fully protected on the remaining switch and minimize OSPF flapping in case of any module failure. Which solution fulfills the requirements for the new design?

Q133. A network engineer must design a UCS SAN configuration for vNIC port eth0, which is currently configured directly via the adaptor. The engineer set the Connection Policies option to VMQ and selected a VMQ Connection Policy named Primary-Cluster. What happens to the eth0 running configuration when the configuration is applied?

Q134. Which type of encoding is used on 8-Gbps links as compared to 10-Gbps links?

Q135. An engineer must complete vNIC and vHBA allocations for 16 new servers. All servers currently have the same requirements, but the company wants to be prepared for a future update to add additional vNICs and vHBAs to servers 14, 15, and 16 only. The engineer decided to use service profile templates to complete the task. Which approach must the engineer take?

Q136. A company has added a new FCoE storage array to increase the performance of datastore access for end users. This storage array is directly connected to the Cisco Nexus 5672UP switches using four 10G port-channel interfaces. After deployment, the end users fail to access the datastore compared to the older solution. A network engineer verified the port-channel interface and finds that the congestion occurs when PFC frames are generated at the FCoE ingress interface. Which action must be taken to resolve the congestion issue?

Q137. Refer to the exhibit. A customer runs an Online Transaction Processing (OLTP) application on Server1. The application generates a small number of transactions and requires low storage latency. Server2 is a backup server that performs backups twice a day. During the backup window, the OLTP application experiences high-latency spikes that affect the application performance. The customer must meet these requirements:
– Maintain consistent low I/O latency for the OLTP server.
– Guarantee I/O throughput for the OLTP server during backup time
– Allow the customer to keep the existing hardware.
Which action must be taken to meet these requirements?