NO.33 Exhibit
[edit]
user@routerl set interfaces ge-0/1/2 unit 0 family inet address 172.16.101.1/24 [edit] user@router# commit check configuration check succeeds
[edit]
user@router#
You need to configure interface ge-0/1/2 with an IP address of 172.16.100.1/24. You have accidentally entered
172.16.101.1/24 as shown in the exhibit.
Which command should you issue to solve the problem?

NO.34 What are two physical interface properties? (Choose two.)

NO.35 How many rescue configuration files are supported on a Junos device?

NO.36 What are two advantages of using the Junos OS? (Choose two.)

NO.37 Which type of device uses the destination IP address to forward packets?

NO.38 What information does the forwarding table require so that the device forwards traffic? (Choose three.)

NO.39 Which protocol is responsible for learning an IPv4 neighbor’s MAC address?

NO.40 In the Junos OS, which keyboard shortcut allows you to move to the start of the line?

NO.41 Click the Exhibit button.

How is traffic, sourced from 10.0.0.0/8, treated by the firewall filter shown in the exhibit?

NO.42 Click the Exhibit button.

Referring the exhibit, what does the highlighted number indicate?

NO.43 What is the primary system log file that is present in the default configuration of a Junos device?

NO.44 What information would you find using the CLI help command?

NO.45 What information does the forwarding table require so that the device forwards traffic? (Choose three.)

NO.46 Which two actions happen when multiple users issue the configure exclusive command to enter configuration mode on a Junos device? (Choose two.)

NO.47 Click the Exhibit button.

Referring to the exhibit, what is the source IP address of the ping that was executed?

NO.48 Click the Exhibit button.

Referring to the exhibit, what should be configured on R1 to advertise a default static route into OSPF?

NO.49 Exhibit
user@router> show route 192.168.100.2
inet.O: 15 destinations, 17 routes (15 active, 0 holddown, 0 hidden) Limit/Threshold: 1048576/1048576 destinations
+ = Active Route, – = Last Active, * = Both 192.168.100.2/32 *[OSPF/IO] 00:14:29, metric 1
> to 172.16.1.6 via ge-0/0/1.0 [BGP/170] 00:06:49, localpref 100
AS path: 65102 I, validation-state: unverified > to 172.16.1.6 via ge-0/0/1.0 Referring to the exhibit, which statement is correct?

NO.50 Click the Exhibit button.

Referring to the exhibit, what should be configured on R1 to advertise a default static route into OSPF?

NO.51 Which character is used to filter the command output in the Junos CLI?

NO.52 Exhibit
{hold:node0}[edit]
root# set system root-authentication ?
Possible completions:
+ apply-groups Groups from which to inherit configuration data
+ apply-groups-except Don’t inherit configuration data from these groups
encrypted-password Encrypted password string
load-key-file File (URL) containing one or more ssh keys
plain-text-password Prompt for plain text password (autoencrypted)
> ssh-dsa Secure shell (ssh) DSA public key string
> ssh-rsa Secure shell (ssh) RSA public key string
{hold:node0}[edit]
root# set system root-authentication plain-text-password
New password:
Retype new password:
{hold:node0}[edit]
root# commit and-quit
[edit interfaces]
‘ge-0/0/0’
HA management port cannot be configured
error: configuration check-out failed
{hold:node0}[edit]
root#
You are unable to remotely access your Juniper device using the CLI.
Referring to the exhibit, which command would you add to the existing configuration to enable remote CLI access?