Get Instant Access to NSE7_SDW-7.0 Practice Exam Questions [Q15-Q31]

By adminOn November 14, 2023

4/5 - (1 vote)

Get Instant Access to NSE7_SDW-7.0 Practice Exam Questions

Reliable Study Materials & Testing Engine for NSE7_SDW-7.0 Exam Success!

Fortinet NSE7_SDW-7.0 exam is a certification test designed for IT professionals seeking to demonstrate their expertise in SD-WAN technologies. NSE7_SDW-7.0 exam is part of the Fortinet Network Security Expert (NSE) program, which is a multi-level certification program designed to validate the skills and knowledge of IT professionals in various areas of network security. The NSE7_SDW-7.0 exam evaluates the candidate’s ability to design, configure, and manage SD-WAN solutions that meet the needs of modern enterprise networks.

NO.15 Refer to the exhibit.

FortiGate has multiple dial-up VPN interfaces incoming on port1 that match only FIRST_VPN.
Which two configuration changes must be made to both IPsec VPN interfaces to allow incoming connections to match all possible IPsec dial-up interfaces? (Choose two.)

Specify a unique peer ID for each dial-up VPN interface.

Use different proposals are used between the interfaces.

Configure the IKE mode to be aggressive mode.

Use unique Diffie Hellman groups on each VPN interface.

NO.16 Refer to the exhibits.
Exhibit A –

Exhibit B –

Exhibit A shows the SD-WAN performance SLA and exhibit B shows the SD-WAN member status, the routing table, and the performance SLA status.
If port2 is detected dead by FortiGate, what is the expected behavior?

Port2 becomes alive after three successful probes are detected.

FortiGate removes all static routes for port2.

The administrator manually restores the static routes for port2, if port2 becomes alive.

Host 8.8.8.8 is reachable through port1 and port2.

This is due to Update static route is enable which removes the static route entry referencing the interface if the interface is dead

NO.17 Refer to the exhibit.

The exhibit shows the SD-WAN rule status and configuration.
Based on the exhibit, which change in the measured packet loss will make T_INET_1_0 the new preferred member?

When all three members have the same packet loss.

When T_INET_0_0 has 4% packet loss.

When T_INET_0_0 has 12% packet loss.

When T_INET_1_0 has 4% packet loss.

NO.18 Refer to the exhibit.

The exhibit shows the SD-WAN rule status and configuration.
Based on the exhibit, which change in the measured latency will make T_MPLS_0 the new preferred member?

When T_INET_0_0 and T_MPLS_0 have the same latency.

When T_MPLS_0 has a latency of 100 ms.

When T_INET_0_0 has a latency of 250 ms.

When T_N1PLS_0 has a latency of 80 ms.

NO.19 Refer to the exhibits.
Exhibit A

Exhibit B

Exhibit A shows the source NAT (SNAT) global setting and exhibit B shows the routing table on FortiGate.
Based on the exhibits, which two actions does FortiGate perform on existing sessions established over port2, if the administrator increases the static route priority on port2 to 20? (Choose two.)

FortiGate flags the sessions as dirty.

FortiGate continues routing the sessions with no SNAT, over port2.

FortiGate performs a route lookup for the original traffic only.

FortiGate updates the gateway information of the sessions with SNAT so that they use port1 instead of port2.

NO.20 Which statement is correct about SD-WAN and ADVPN?

Routes for ADVPN shortcuts must be manually configured.

SD-WAN can steer traffic to ADVPN shortcuts, established over IPsec overlays, configured as SD-WAN members.

SD-WAN does not monitor the health and performance of ADVPN shortcuts.

You must use IKEv2 on IPsec tunnels.

NO.21 Refer to the exhibit.

Based on the exhibit, which two actions does FortiGate perform on traffic passing through port2? (Choose two.)

FortiGate does not change the routing information on existing sessions that use a valid gateway, after a route change.

FortiGate performs routing lookups for new sessions only, after a route change.

FortiGate always blocks all traffic, after a route change.

FortiGate flushes all routing information from the session table, after a route change.

NO.22 Refer to the exhibits.
Exhibit A –

Exhibit B –

Exhibit A shows the traffic shaping policy and exhibit B shows the firewall policy.
The administrator wants FortiGate to limit the bandwidth used by YouTube. When testing, the administrator determines that FortiGate does not apply traffic shaping on YouTube traffic.
Based on the policies shown in the exhibits, what configuration change must be made so FortiGate performs traffic shaping on YouTube traffic?

Destination internet service must be enabled on the traffic shaping policy.

Application control must be enabled on the firewall policy.

Web filtering must be enabled on the firewall policy.

Individual SD-WAN members must be selected as the outgoing interface on the traffic shaping policy.

NO.23 Refer to the exhibits.
Exhibit A –

Exhibit B –

Exhibit A shows a site-to-site topology between two FortiGate devices: branch1_fgt and dc1_fgt. Exhibit B shows the system global and system settings configuration on dc1_fgt.
When branch1_client establishes a connection to dc1_host, the administrator observes that, on dc1_fgt, the reply traffic is routed over T_INET_0_0, even though T_INET_1_0 is the preferred member in the matching SD-WAN rule.
Based on the information shown in the exhibits, what configuration change must be made on dc1_fgt so dc1_fgt routes the reply traffic over T_INET_1_0?

Enable auxiliary-session under config system settings.

Disable tcp-session-without-syn under config system settings.

Enable snat-route-change under config system global.

Disable allow-subnet-overlap under config system settings.

Controlling return path with auxiliary session When multiple incoming or outgoing interfaces are used in ECMP or for load balancing, changes to routing, incoming, or return traffic interfaces impacts how an existing sessions handles the traffic. Auxiliary sessions can be used to handle these changes to traffic patterns.https://docs.fortinet.com/document/fortigate/7.0.11/administration-guide/14295/controlling-return-path-with-auxiliary-session

NO.24 Which are two benefits of using CLI templates in FortiManager? (Choose two.)

You can reference meta fields.

You can configure interfaces as SD-WAN members without having to remove references first.

You can configure FortiManager to sync local configuration changes made on the managed device, to the CLI template.

You can configure advanced CLI settings.

NO.25 Refer to the exhibit.

The exhibit shows the details of a session and the index numbers of some relevant interfaces on a FortiGate appliance that supports hardware offloading. Based on the information shown in the exhibits, which two statements about the session are true? (Choose two.)

The reply direction of the asymmetric traffic flows from port2 to port3.

The auxiliary session can be offloaded to hardware.

The original direction of the symmetric traffic flows from port3 to port2.

The main session cannot be offloaded to hardware.

NO.26 In the default SD-WAN minimum configuration, which two statements are correct when traffic matches the default implicit SD-WAN rule? (Choose two )

Traffic has matched none of the FortiGate policy routes.

Matched traffic failed RPF and was caught by the rule.

The FIB lookup resolved interface was the SD-WAN interface.

An absolute SD-WAN rule was defined and matched traffic.

NO.27 Which two settings can you configure to speed up routing convergence in BGP? (Choose two.)

update-source

set-route-tag

holdtime-timer

link-down-failover

NO.28 Refer to the exhibit.

FortiGate has multiple dial-up VPN interfaces incoming on port1 that match only FIRST_VPN.
Which two configuration changes must be made to both IPsec VPN interfaces to allow incoming connections to match all possible IPsec dial-up interfaces? (Choose two.)

Specify a unique peer ID for each dial-up VPN interface.

Use different proposals are used between the interfaces.

Configure the IKE mode to be aggressive mode.

Use unique Diffie Hellman groups on each VPN interface.

NO.29 Refer to the exhibits.
Exhibit A –

Exhibit B –

Exhibit A shows a site-to-site topology between two FortiGate devices: branch1_fgt and dc1_fgt. Exhibit B shows the system global and system settings configuration on dc1_fgt.
When branch1_client establishes a connection to dc1_host, the administrator observes that, on dc1_fgt, the reply traffic is routed over T_INET_0_0, even though T_INET_1_0 is the preferredmember in the matching SD-WAN rule.
Based on the information shown in the exhibits, what configuration change must be made on dc1_fgt so dc1_fgt routes the reply traffic over T_INET_1_0?

Enable auxiliary-session under config system settings.

Disable tp-session-without-syn under config system settings.

Enable snat-route-change under config system global.

Disable allow-subnet-overlap under config system settings.

Explanation
Controlling return path with auxiliary session When multiple incoming or outgoing interfaces are used in ECMP or for load balancing, changes to routing, incoming, or return traffic interfaces impacts how an existing sessions handles the traffic. Auxiliary sessions can be used to handle these changes to traffic patterns.https://docs.fortinet.com/document/fortigate/7.0.11/administration-guide/14295/controlling-return-path-

NO.30 Refer to the exhibit.

Which statement explains the output shown in the exhibit?

FortiGate performed standard FIB routing on the session.

FortiGate will not re-evaluate the session following a firewall policy change.

FortiGate used 192.2.0.1 as the gateway for the original direction of the traffic.

FortiGate must re-evaluate the session due to routing change.

NO.31 Refer to the exhibit.

Based on the exhibit, which statement about FortiGate re-evaluating traffic is true?

The type of traffic defined and allowed on firewall policy ID 1 is UDP.

FortiGate has terminated the session after a change on policy ID 1.

Changes have been made on firewall policy ID 1 on FortiGate.

Firewall policy ID 1 has source NAT disabled.

Loading …

Validate your Skills with Updated NSE7_SDW-7.0 Exam Questions & Answers and Test Engine: https://www.testkingit.com/Fortinet/latest-NSE7_SDW-7.0-exam-dumps.html

NSE7_SDW-7.0, FortinetNSE7_SDW-7.0 latest test practice, NSE7_SDW-7.0 reliable exam camp file, NSE7_SDW-7.0 reliable study questions free, NSE7_SDW-7.0 test guide online, NSE7_SDW-7.0 test pass4sure

Get Instant Access to NSE7_SDW-7.0 Practice Exam Questions [Q15-Q31]

Leave a Reply Cancel reply