Buy Latest Oct 21, 2023 C-IBP-2211 Exam Q&A PDF – One Year Free Update [Q47-Q67]

By adminOn October 21, 2023

5/5 - (1 vote)

Buy Latest Oct 21, 2023 C-IBP-2211 Exam Q&A PDF – One Year Free Update

Download the Latest C-IBP-2211 Dump – 2023 C-IBP-2211 Exam Questions

NO.47 You need to define a new logic for a key figure to drive values from the PERPRODCUSTREGION level to the PERPRODCUST level.Which of the following configuration options are possible for this process?Note: There are 2 correct answers to this question.

Splitting the values from aggregated to detailed level, based on the time profile attribute

Splitting the values from aggregated to detailed level, based on a stored split-factor key figure

Splitting the values from aggregated to detailed level using multiplication by the proportions

Splitting the values from detailed to aggregated level by using a copy operator

NO.48 You need to create time periods for the time profile in a planning area.What should you be aware of when running the Create Time Periods application job?

The assigned Planning Area must be active.

This application job can be run for multiple time profiles at once.

In the Parameter Section of the application job, choose the Time Profile ID and Planning Area.

A time profile has to be activated so that the application job can proceed.

NO.49 You are modeling a new product introduction.Which of the following steps can be part of your modeling process in the Manage Product Lifecycle app?Note: There are 2 correct answers to this question.

Enter the product family to which the new product belongs

Enter the Phase-out Start Date and Phase-out End Date

Create planning objects for new combinations in the app

Copy the launch dimension from the reference product to the new product

NO.50 Which of the following are inputs to Demand Sensing with Gradient Boosting (Full) algorithm?Note:
There are 2 correct answers to this question.

Sales Order Quantities (both historical and future open orders)

Forecast Error CV Calculated by Manage Forecast Error Calculations app

Future Consensus Forecasts and Lagged Forecast Snapshots

Recommended Safety Stocks from Multistage Inventory Optimization

NO.51 Which of the following data can be tracked using a change-history-enabled key figure?Note: There are 3 correct answers to this question.

Key figure type

Modified date

Scenario ID

Reason code

Attributes

NO.52 You are working on a mid-range plan that spans the seasonal peak and you are evaluating the need for additional crewing.Which of the following parameters can you model to plan production with extra shift(s)?

Capacity expansion with additional costs

Adjusted production interactive values

Incremental production values

Production source validity at the start of seasonal peak

NO.53 Safety Stock outputs from Multistage Inventory Optimization are sent to which of these processes?
Note: There are 2 correct answers to this question.

Decoupling Points determination in SAP IBP for demand-driven replenishment

Supply Heuristics in SAP IBP for sales and operations

Charts creation in SAP Supply Chain Control Tower

Demand Sensing with Gradient Boosting (Full)

NO.54 Which features apply to quota violations modeled with the optimizer?

Quotas can be modeled for sourcing location, production, and consensus demand.

Because quota violations shouldn’t be possible, the non-delivery cost rate is less than quota violation cost.

Min and Max Quotas have to be the same as sourcing ratios.

The optimizer will only violate quotas if quotas are maintained as time-dependent key figures.

NO.55 What function would you use to configure a year-to-date calculation?

Rolling Aggregation

Last Period Aggregation

Cumulative Aggregation

Dynamic Rolling Aggregation

NO.56 A time profile is defined with these levels: day, technical week, week, month, quarter, and year. What condition in configuration will allow you to have a different value in the current week, versus all other time buckets?

IF(“PERIODID4” =”$$PERIODID4CU$$…)

IF(“PERIODID2” =”$$PERIODID2CU$$…)

IF(“PERIODID3” =”$$PERIODID3CU$$…)

IF(“PERIODID5” =”$$PERIODID5CU$$…)

NO.57 Which are the mandatory preconditions for an attribute that can be used for saving the segmentation results?Note: There are 2 correct answers to this question.

The Business Meaning of the attribute has been specified.

The attribute should be a non-key attribute of the master data type.

The attribute belongs to a simple or compound master data type.

The attribute should be assigned to all planning levels.

NO.58 What are the possible ways that an attribute intended for use as an attribute as a key figure can be created and assigned?

Created as type NVARCHAR and assigned to an external master data type

Created as type INTEGER and assigned to a compound master data type

Created as type INTEGER and assigned to a simple master data type

Created as type DECIMAL and assigned to a compound master data type

NO.59 Which SAP IBP planning operator can be run to delete planning objects in a certain version?

Purge Key Figure Data

Purge Key Figure Data Outside Planning Area Planning Horizon

Purge Non-Confirming Data

Purge Master Data

NO.60 Which of the following checks for master data and key figures does the Check Mode algorithm trigger?Note: There are 3 correct answers to this question.

It checks whether the location products specified in the master data are connected by customer sourcing rules within the supply chain network.

It checks whether the location resource specified in the master data forms a cycle in the supply chain network.

It checks whether the sourcing in the Production Source Item Master Data type exists.

It checks whether the heuristic detects cycles formed by nodes (such as location products) in the supply chain network.

It checks whether the required planning level master data exists for a subset of input key figures.

NO.61 You are working with inventory key figures.What are some of the business scenarios where you can use the Last Period Aggregation function?Note: There are 2 correct answers to this question.

Calculating the value of inventory on any time profile level ensuring flexibility of calculation

Calculating how many periods inventory is going to last based on the planned demand

Search for and return the last not null value of the inventory key figure

Calculating the value of inventory on a weekly basis, using static aggregation from the daily level

NO.62 How can the SAP IBP scenario modeling functionality support business users in the S&OP planning cycle?Note: There are 2 correct answers to this question.

Simulate heuristics run in Supply Review stage

Simulate statistical forecast at the Demand Review stage

Simulate demand sensing inputs for Supply Review

Model inventory turns based on Target Safety stocks

NO.63 What does ABC/XYZ segmentation allow you to do?Note: There are 2 correct answers to this question.

Substitute missing values in case of sporadic demands.

Use forecasting algorithms that are specific to seasonal demands of SKUs in the segment “B”.

Identify inventory items that require closer attention.

Choose time-independent key figures as segmentation measures.

NO.64 Which of the following data inputs, when increased, will always cause an increase in the safety stock outputs when the Global (multi-stage) Inventory Optimization operator is run?Note: There are 2 correct answers to this question.

Holding Cost Percentage

Minimum Lot Size

Target Service Level

Transportation Lead Time Error CV

NO.65 Which parts of the S&OP high-level process would the Inventory planning and optimization process fit into?Note: There are 2 correct answers to this question.

Management business Review, by providing the inventory targets for endorsement

Demand Review, by using the output of demand planning as input into calculations

Supply Review, by providing an input to supply network planning

Reconciliation Review, by providing inventory parameters for one consolidated plan

NO.66 Which of the following are functions of SAP IBP for demand?Note: There are 2 correct answers to this question.

Demand sensing of demand data using predictive analytics tools

Embedded, on-the-fly demand analytics

Detailed statistical analysis of demand data using predictive analytics tools

Consideration of demand-driven analysis for buffer positioning.

NO.67 Which of the following are features of the S&OP process templates?Note: There are 2 correct answers to this question.

New instances of templates allow for re-use of the same processes.

All process templates are assigned to dashboards.

Each step depicted in the template can have tasks associated with it.

The S&OP process step can be started with an application job.

Verified C-IBP-2211 Dumps Q&As – 1 Year Free & Quickly Updates: https://www.testkingit.com/SAP/latest-C-IBP-2211-exam-dumps.html

Buy Latest Oct 21, 2023 C-IBP-2211 Exam Q&A PDF – One Year Free Update [Q47-Q67]

Leave a Reply Cancel reply