[Jan-2024] Use Real 300-715 Dumps – 100% Free 300-715 Exam Dumps [Q90-Q112]

By adminOn January 17, 2024

Rate this post

[Jan-2024] Use Real 300-715 Dumps – 100% Free 300-715 Exam Dumps

300-715 PDF Dumps Exam Questions – Valid 300-715 Dumps

Cisco 300-715 certification exam is an excellent opportunity for IT professionals to showcase their skills and knowledge in implementing and managing Cisco ISE solutions. Implementing and Configuring Cisco Identity Services Engine certification is highly valued in the IT industry and provides various job opportunities. Candidates who pass the exam can expect to have a successful career in network security.

Difficulty in Attempting Implementing and Configuring Cisco Identity Services Engine (300-715 SISE)

Our Cisco 300-715 practice exam has been duly prepared by the team of experts after an in-depth analysis of Cisco recommended syllabus. We update our material regularly. So, it is intended to keep candidates updated because as and when Cisco will announce any changes in the material; we will update the material right away. After practicing with our Cisco 300-715 exam dumps candidate can pass Cisco 300-715 exam with good grades. We recommend CISCO 300-715 practice exams for the exam preparation. TestKingIT CISCO 300-715 practice exams will help with your goals.

NEW QUESTION 90
In a standalone Cisco ISE deployment, which two personas are configured on a node? (Choose two )

publisher

administration

primary

policy service

subscriber

https://www.cisco.com/c/en/us/td/docs/security/ise/2-0/admin_guide/b_ise_admin_guide_20/b_ise_admin_guide_20_chapter_010.html

NEW QUESTION 91
What does MAB leverage a MAC address for?

Calling-Station-ID

password

cisco-av-pair

username

NEW QUESTION 92
An engineer is configuring the remote access VPN to use Cisco ISE for AAA and needs to conduct posture checks on the connecting endpoints After the endpoint connects, it receives its initial authorization result and continues onto the compliance scan What must be done for this AAA configuration to allow compliant access to the network?

Configure the posture authorization so it defaults to unknown status

Fix the CoA port number

Ensure that authorization only mode is not enabled

Enable dynamic authorization within the AAA server group

NEW QUESTION 93
Refer to the exhibit.

A network engineers configuring the switch to accept downloadable ACLs from a Cisco ISC server Which two commands should be run to complete the configuration? (Choose two)

aaa authorization auth-proxy default group radius

radius server vsa sand authentication

radius-server attribute 8 include-in-access-req

ip device tracking

dot1x system-auth-control

NEW QUESTION 94
Which two default endpoint identity groups does Cisco ISE create? (Choose two )

block list

endpoint

profiled

allow list

unknown

Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide Default Endpoint Identity Groups Created for EndpointsCisco ISE creates the following five endpoint identity groups by default: Blacklist, GuestEndpoints, Profiled, RegisteredDevices, and Unknown. In addition, it creates two more identity groups, such as Cisco-IP-Phone and Workstation, which are associated to the Profiled (parent) identity group. A parent group is the default identity group that exists in the system.
Cisco ISE creates the following endpoint identity groups:
* Blacklist-This endpoint identity group includes endpoints that are statically assigned to this group in Cisco ISE and endpoints that are block listed in the device registration portal. An authorization profile can be defined in Cisco ISE to permit, or deny network access to endpoints in this group.
* GuestEndpoints-This endpoint identity group includes endpoints that are used by guest users.
* Profiled-This endpoint identity group includes endpoints that match endpoint profiling policies except Cisco IP phones and workstations in Cisco ISE.
* RegisteredDevices-This endpoint identity group includes endpoints, which are registered devices that are added by an employee through the devices registration portal. The profiling service continues to profile these devices normally when they are assigned to this group. Endpoints are statically assigned to this group in Cisco ISE, and the profiling service cannot reassign them to any other identity group.
These devices will appear like any other endpoint in the endpoints list. You can edit, delete, and block these devices that you added through the device registration portal from the endpoints list in the Endpoints page in Cisco ISE. Devices that you have blocked in the device registration portal are
* assigned to the Blacklist endpoint identity group, and an authorization profile that exists in Cisco ISE redirects blocked devices to a URL, which displays “Unauthorised Network Access”, a default portal page to the blocked devices.
* Unknown-This endpoint identity group includes endpoints that do not match any profile in Cisco ISE.
In addition to the above system created endpoint identity groups, Cisco ISE creates the following endpoint identity groups, which are associated to the Profiled identity group:
* Cisco-IP-Phone-An identity group that contains all the profiled Cisco IP phones on your network.
* Workstation-An identity group that contains all the profiled workstations on your network.

NEW QUESTION 95
Which use case validates a change of authorization?

An authenticated, wired EAP-capable endpoint is discovered

An endpoint profiling policy is changed for authorization policy.

An endpoint that is disconnected from the network is discovered

Endpoints are created through device registration for the guests

Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_prof_pol.html

NEW QUESTION 96
An engineer is configuring sponsored guest access and needs to limit each sponsored guest to a maximum of two devices. There are other guest services in production that rely on the default guest types. How should this configuration change be made without disrupting the other guest services currently offering three or more guest devices per user?

Create an ISE identity group to add users to and limit the number of logins via the group configuration.

Create a new guest type and set the maximum number of devices sponsored guests can register

Create an LDAP login for each guest and tag that in the guest portal for authentication.

Create a new sponsor group and adjust the settings to limit the devices for each guest.

NEW QUESTION 97
An administrator is adding a switch to a network that is running Cisco ISE and is only for IP Phones The phones do not have the ability to authenticate via 802 1X Which command is needed on each switch port for authentication?

dot1x system-auth-control

enable bypass-mac

enable network-authentication

mab

Reference:
https://www.cisco.com/en/US/docs/ios-xml/ios/sec_usr_aaa/configuration/15-2mt/sec-config-mab.html

NEW QUESTION 98
What allows an endpoint to obtain a digital certificate from Cisco ISE during a BYOD flow?

Network Access Control

My Devices Portal

Application Visibility and Control

Supplicant Provisioning Wizard

NEW QUESTION 99
What is the Cisco ISE default admin login name and password?

ISEAdmin/admin

admin/cisco

admin/no default password–the admin password is configured at setup

admin/admin

NEW QUESTION 100
Which three conditions can be used for posture checking? (Choose three.)

certificate

operating system

file

application

services

NEW QUESTION 101
What sends the redirect ACL that is configured in the authorization profile back to the Cisco WLC?

State attribute

Class attribute

Event

Cisco-av-pair

Section: Profiler
Explanation/Reference: https://community.cisco.com/t5/network-access-control/ise-airespace-acl-wlc-problem/td- p/2110491

NEW QUESTION 102
A company is attempting to improve their BYOD policies and restrict access based on certain criteri a. The company’s subnets are organized by building. Which attribute should be used in order to gain access based on location?

static group assignment

IP address

device registration status

MAC address

NEW QUESTION 103
Drag the steps to configure a Cisco ISE node as a primary administration node from the left into the correct order on the night.

NEW QUESTION 104
An administrator is configuring a Cisco WLC for web authentication Which two client profiling methods are enabled by default if the Apply Cisco ISE Default Settings check box has been selected’? (Choose two.)

CDP

DHCP

HTTP

SNMP

LLDP

NEW QUESTION 105
A network engineer needs to ensure that the access credentials are not exposed during the 802.1x authentication among components. Which two protocols should complete this task?

PEAP

EAP-MD5

LEAP

EAP-TLS

EAP-TTLS

NEW QUESTION 106
An engineer is designing a BYOD environment utilizing Cisco ISE for devices that do not support native supplicants Which portal must the security engineer configure to accomplish this task?

MDM

Client provisioning

My devices

BYOD

https://www.cisco.com/c/en/us/td/docs/security/ise/2-2/admin_guide/b_ise_admin_guide_22/b_ise_admin_guide_22_chapter_01111.html

NEW QUESTION 107
What is needed to configure wireless guest access on the network?

endpoint already profiled in ISE

WEBAUTH ACL for redirection

valid user account in Active Directory

Captive Portal Bypass turned on

NEW QUESTION 108
Which two endpoint compliance statuses are possible? (Choose two.)

compliant

valid

unknown

known

invalid

Section: Endpoint Compliance

NEW QUESTION 109
Refer to the exhibit.

A network engineers configuring the switch to accept downloadable ACLs from a Cisco ISC server Which two commands should be run to complete the configuration? (Choose two)

aaa authorization auth-proxy default group radius

radius server vsa sand authentication

radius-server attribute 8 include-in-access-req

ip device tracking

dot1x system-auth-control

NEW QUESTION 110
What is the purpose of the ip http server command on a switch?

It enables the https server for users for web authentication.

It enables dot1x authentication on the switch.

It enables MAB authentication on the switch.

It enables the switch to redirect users for web authentication.

Section: Web Auth and Guest Services

NEW QUESTION 111
What service can be enabled on the Cisco ISE node to identity the types of devices connecting to a network?

MAB

profiling

posture

central web authentication

NEW QUESTION 112
Refer to the exhibit:

Which command is typed within the CU of a switch to view the troubleshooting output?

show authentication sessions mac 000e.84af.59af details

show authentication registrations

show authentication interface gigabitethemet2/0/36

show authentication sessions method

Loading …

Ultimate 300-715 Guide to Prepare Free Latest Cisco Practice Tests Dumps: https://www.testkingit.com/Cisco/latest-300-715-exam-dumps.html

300-715, Cisco300-715 exam objectives pdf, 300-715 new braindumps files, 300-715 reliable dumps free, 300-715 trustworthy exam torrent

[Jan-2024] Use Real 300-715 Dumps – 100% Free 300-715 Exam Dumps [Q90-Q112]

Difficulty in Attempting Implementing and Configuring Cisco Identity Services Engine (300-715 SISE)

Leave a Reply Cancel reply